Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Chisell Storage on Walls

Posts

Chisell Storage on Walls

#1

Chisell Storage on Walls

Steve Kirincich

Does anyone have opinions on the use of magnetic strips/bars to store chisels on workshop walls? They are clearly not as elegant as shop made wooden holders, but they would seem to be simple and flexible. Thanks.

Steve

Re: Chisell Storage on Walls

#2

Magnets

Hoa in Alameda

I store chisels in drawers.

The problem with magnetic bars is that they magnetize the chisel blades.

Then when the chisel is being sharpened, it attracts the metal dust like... magnet!

-- Hoa

Re: Chisell Storage on Walls

#3

Re: Chisell Storage on Walls

Joseph Mulherin

Steve. like Hoa said the magnets do their thing on the metal chisels too. IMHO, I would make a slotted box you could insert the chisels into wood slots...sort of handy at the rear of the workbench near the wall.

Re: Chisell Storage on Walls

#4

Re: Chisel Storage on Walls

George Colonel's Workshop-Havertown PA

Good Evening Steve,

I used forstner bits to create space for the chisel shanks in scrap wood. Then used my bandsaw to cut a slot into the round hole. I've slightly beveled the rims of the chisel holes so the shanks sink partially into the depression. This arrangement holds the chisels firmly and provides access without interfering with the actual blades of the chisels. And, the blades are isolated from each other. Its easy, elegant, and costs nothing. Mounting them on a wall is very handy as well as being visual.

George

Re: Chisell Storage on Walls

#5

Re: Chisell Storage on Walls

wilbur

Here's how I made my chisel rack:


This method of laying the chisels horizontally between two short dowels may look like an accident waiting to happen. What is not obvious in the picture is that the dowels are not horizontal, but are angled up about 5 degrees, so they make a nice crook for the chisel to rest in, and the chisels are much more secure than it may seem at first glance.

Re: Chisell Storage on Walls

#6

Indeed

Bill Tindall

I tried it for lathe tools. Very annoying result!

Re: Chisell Storage on Walls

#7

Re: Chisell Storage on Walls

FredD

My tool room has a Pegboard above the bench and clips hol the chisels , all the way from 2 1/2" framing chisels to quarter inch butt chisels.

FredD

Re: Chisell Storage on Walls

#8

Re: Chisell Storage on Walls *LINK*

charlie belden

You're a woodworker right. Why not MAKE chisel racks - that fit in the doors of a wall hanging tool cabinet. You've got handtools - and squares and awls and marking knives and . . .

With custom chisel racks, you can take a set to the bench - and have a place to hold them while you're using them. When you're done with them they go back in the door of a cabinet.


Chisel Racks & Other Racks

Re: Chisell Storage on Walls

#9

Nice rack


Re: Chisell Storage on Walls

#10

Re: Indeed

TomD

I have used it for lathe tools with good results for 20 years, but there are annoying aspects. Some tools stick to the rest, and it isn't all that organized.

Re: Chisell Storage on Walls

#11

Re: Chisell Storage on Walls

TomD

Wilbur, I have concrete floors, so while I use those Odate style racks for lots of tools, I don't use them for my better chisels. If I had wood floors I probably would since they are very convenient.

Anyway...

I make these "fitted" racks in maple. Just drill a hole in a piece of wood to the minor diameter of the ferule, then enlarge with a reamer. You can see the reamer I use in one of the racks. Then once the hole is the right size, for all the chisels cut off the front of the strip to expose the holes for a front entry.

It is best to start with the small chisels since they will fit down into the rack with the holes closed off. Do the final fitting on the larger chisels after exposing the front of the holes.

Very quick project, and really gets them organized. On the larger rack I have 4 rows of chisels and I put them too close together. Sometimes when removing a lower chisel I take a scratch on an upper one. I should have left an extra inch or two.



Re: Chisell Storage on Walls

#12

My shop floors are concrete, too.