Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Somewhat OT - thinning trees

Posts

Somewhat OT - thinning trees

#1

JL

Somewhat OT - thinning trees

JL

I have a lot of young poplars growing in one stretch of my property. Obviously they all can't be allowed to reach full growth.

Anyone have any clue as what sort of guidelines that I should use to thin them?

Re: Somewhat OT - thinning trees

#2

Re: Somewhat OT - thinning trees

paul in AZ

As a general rule a tree's root system is as wide as the canopy. Anything inside the drip line is competing with the tree for food and water. Hybrid poplar spacing is cited at 12 feet to 20 feet when grown.

Re: Somewhat OT - thinning trees

#3

Myths *LINK*

Tom Dunlap

In some cases most of a trees larger roots are inside the dripline. but for the majority of trees the majority of the root volume is wayyyyyy outside.

The root system of a tree is like the base of a wine glass....thin and wide.

Have you ever seen a carrot type root system after a storm tips a tree over? How about after the bulldozers push over the trees for lot clearing?

The canopy does NOT 'compete' with the roots. The tree is one whole organism and the roots support the canopy and the canopy supports the roots.

There are a couple of websites that will answer the pruning question and show how trees grow:

http://hort.ufl.edu/woody/

Ed Gilman's work will amaze you. Find your way to the pages where he describes 'blowing' the trees with the 'hurricane machine'!

http://warnell.forestry.uga.edu/warnell/service/library/index.php3?docID=146

Go backwards on the UGA page and find more articles by Kim Coder. He is brilliant!


Trees Are Good

Re: Somewhat OT - thinning trees

#4

check with local Forester

Bill Tindall

In general thin so the tops don't overlap

Re: Somewhat OT - thinning trees

#5

JL

Not pruning - thinning

JL

I basically have too many young poplars in a few areas. I need to know what sort of spacing I need for the trees to thrive and grow properly.

But thanks for the links - they'll help with pruning.

Re: Somewhat OT - thinning trees

#6

The 'other' thinning...oops

Tom Dunlap

I read your post as thinning the canopy not thinning the grove.

Arborists call your type of thinning a 'horizontal pruning' job :)

Find your regional small woodlands forester. there should be one who works for your state ag, forestry or dpt. of natural resources.

Re: Somewhat OT - thinning trees

#7

Re: Somewhat OT - thinning trees

Dale Lenz

JL, around here as a general rule and with out seeing what you have, I'd recommend a D+6 method. For each tree you chose to leave, take that tree's diameter in inches and add 6. Say your keeper tree is a 10" diameter, at breast high, DBH, + 6 equals 16, the units of the 16 is in feet. So you clear out all trees 16' radius around your keeper tree. This is what I recommend to forest landowner that I can not come out and see what they have. Once again this method is a place to start. As others have said call your local forester as he/she will have more local knowledge than I do. BTW, if your populars are small, the cut ones will spout back 10X come spring unless you do something about that.

Good luck

Re: Somewhat OT - thinning trees

#8

JL

Re: Somewhat OT - thinning trees

JL

Okay, that sounds doable - though I'll probably be more aggressive than that.

I'm looking to thin out many young shoots and a couple of the older ones. I don't want to thin out everything - just enough to neaten things up

Re: Somewhat OT - thinning trees

#9

preventing resprout

Bill Tindall

After you cut the tree paint the stump with brush killer. They will not resprout, even if they are the notorious locust. It doesn't work so well in spring when sap is flowing strong

To locate your local State forester contact the Ag extension agent for your county. Often they share the same building.

Dale.....the Federal forester required more aggressive thinning for timber production, under their "crop release" program. They didn't want tops touching. I thought this was ridiculous over-thinning and didn't do it. Maybe they only know about pine trees......or they never leave a desk in Washington. Consistent were the ignorant planting recommendations- upland trees recommended for riparian areas, for example.

Re: Somewhat OT - thinning trees

#10

Crowns not touching?

Dale Lenz

Bill, I fail to understand your logic here, thinning so the crowns are not touching is not a bad thinning plan as long as you don't have 20' between crowns. At 10' between crowns the residual tree's crown will close in a few years. I always recommend to leave smaller trees on the sunny sides of a high value trees when thinning to keep the target tree from epocormic(SP?) branching, bole spouts.

Agree, following Big Brother's game to get some money can be nuts at time. It's all about Money!

Re: Somewhat OT - thinning trees

#11

Re: preventing resprout

FredD

Most Hardwares and all Co ops around here carry a product called Tordon that prevents regrowth from Stump , if it is applied right after cutting the tree or Sapling.

FredD

Re: Somewhat OT - thinning trees

#12

Tordon RTU, Ready to use

Dale Lenz

Can be used during most of the year.