Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Cutter needed

Posts

Cutter needed

#1

Cutter needed

JMOHNIKE

I have an old Black & decker door planer late 50's early 60's model. It has a sprial cutter head witha 3/8th bore. I can not locate a replacement cutter, the one on it now has seen its last sharpening a long time ago. Anyone have any ideas?

Re: Cutter needed

#2

Re: Cutter needed

Neal in San Jose

I've seen both these planers and the cutter heads periodically on Ebay. I just looked and didn't see exactly what you are looking for, but sometimes you need to be a bit creative on what call what you are searching for. Good luck

Re: Cutter needed

#3

Besides the bore, what is OD & L?

Keith Newton

I hAv a cutter around here someplace about 3" x ~ 1 1/4", if I can find it.

Re: Cutter needed

#4

Re: Besides the bore, what is OD & L?

Keith Newton

I found the cutter which came to mind. It is 2.520"L x 1.120" x .5" ID.

While it has a slow spiral, the carbide appears to be straight along it's face, which would lead me to think that it would be possible for a good sharpening service to replace the carbide on your head.

Re: Cutter needed

#5

Re: Besides the bore, what is OD & L?

Jason Waters

Keith,

If JMOHNIKE doesn't need that cutter, I'd be interested in it. I think it fits my planer (1/2" bore). Send me an email if you like.

JMOHNIKE,

I concur with the other poster, Ebay is about the only way to go. Don't over look buying a whole tool just to get the cutter. Sometimes that can be done quite easily. The old spiral cutters are getting hard to find. I love them too.