We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I'm attaching 1/2" high-quality MDF false fronts to 1/2" plywood drawers. (These are for use in an upstairs "bonus room." The largest front is 13" x 27". Does this call for confirmat screws? Should I also use glue between the ply and the MDF?
PS - please don't try to persuade me out of the MDF. Long story - that train's already left the station. ;-)
There are a number of useful tips that i can offer here. I don't know why you are using half inch. I usually use 3/4", which give a bit more thread bite.
Those screws should be good, if the pull screws go all the way through to the inside of the box.
There are a number of tricks for getting the fronts aligned perfectly after the cabinets are set.
But, if you have a problem with the screw bite in MDF, I like to
Take it off, then saturate the screw crater with thin cyanoacrylate glue. It will soak out into the surrounding fiber, forming a solid, Locked in plug, which may need a new pilot hole to get the screw into, but you will know it is solid after you do.