Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Great drum sander tips! *LINK*

Posts

Great drum sander tips! *LINK*

#1

Great drum sander tips! *LINK*

Grant in Iowa

Just found this article with great drum sander tips. Originally written by Dave Munkittrick waaaay back in 2008 for American Woodworker, this article gives great information about the effective use of your drum sander.

Been using one for several years, but I have learned a few things by reading the article. I am eager to try the "Plexiglas trick" on stubborn burn marks.

The PDF article is hosted by SuperMax, the company who has taken over production and support of some Performax sander models.

Regards,

Grant in Iowa


American Woodworker Drum sander tips

Re: Great drum sander tips! *LINK*

#2

"Lightbulb" moment yesterday . . .

steve mackay

The sanding band on the Dremel was loading up. Was about to change the 120 grit band when I walked over to the stationary sander and grabbed the snot block. Wasn'e really expecting it to do much. It did though ! Cleaned 'er right up. With the price of stuff now, a couple extra miles always helps out.

Re: Great drum sander tips! *LINK*

#3

Re: "Lightbulb" moment yesterday . . .

John Lucas

Steve I've been doing that for a while. It works great. If it gets really clogged use a file card to clean it and then use the crepe rubber. It won't restore it to original condition but does keep it usable for alittle longer.