Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Any experience here with either WorkSharp sharpeni

Posts

Any experience here with either WorkSharp sharpeni

#1

Any experience here with either WorkSharp sharpeni

Howard In Toronto

I'm currently using DMT diamonds for my chisels. They're not bad but I find them mighty tedious. I guess I'd still prefer something even faster for both sharpening and touchups.

Does anybody have any first-hand experience with either WorkSharp sharpening machine? Could you take a moment to describe the Pros and the Cons of your particular unit?

Any help would be appreciated.

Thank you.

Howard

Re: Any experience here with either WorkSharp sharpeni

#2

Re: Any experience here with either WorkSharp shar

Robert R. Clough

Howard, I have the Worksharp, have used it fairly steadily, and have found it to be an excellent machine. Until you know the machine, follow instructions carefully. If you do get it, get the full platform for the top as well, That way you may use any device that sets the correct angle while holding the tool.

My plane irons and my chisels are now kept quite sharp easily.

Re: Any experience here with either WorkSharp sharpeni

#3

Alternative

Bill Tindall

Hollow grind chisels, and plane irons, with an eight inch grinder. Then it is short work refining the edge on the stones. You just have to revisit the grinder when the hollow needs reestablishing.

The secret to using the grinder is to use a light touch on a crowned wheel of the right composition.

Re: Any experience here with either WorkSharp sharpeni

#4

Re: Any experience here with either WorkSharp shar

AZ in Colorado Springs

I have the worksharp 2000. I like it a lot. It has a built in jig for 25 degrees, while the work sharp 3000 offers a bit more flexibility.

I now have sharp chisels and plane irons. And, because it's easy to use, I re-hone cutting edges after about each hour of use. (It's a good feeling whne you can start to recognize that the edge needs a touch up.)

I use the topside to hone the hatchet.

Klingspor sells a packet of adhesive-backed sanding discs in a variety of grits sized to fit the work sharp discs.

Re: Any experience here with either WorkSharp sharpeni

#5

Re: Alternative

Ron Jones

Bill is right. It certainly can be done that way. I have the WS 3000 to be a more foolproof way to do it though. I don't have the steady hands that I once had and find the WS to be the easiest and best way to get sharp edges.