Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Corner Cabinet Hinge Issue

Posts

Corner Cabinet Hinge Issue

#1

Corner Cabinet Hinge Issue

JimG

I am building a pie corner cabinet based on this

http://www.finehomebuilding.com/how-to/articles/building-a-lazy-susan-cabinet.aspx

SWMBO wants concealed self-closing hinges, mainly Euro type. My problem is that the stiles are 1.5". So a standard 35mm hinge won't work. For the other cabinets I have been using the Blum mini hinge, but it only has a 92 degree or some such opening. I would like at least 160. One side of the cabinet has a stove next to it.

I would love some creative suggestions.

Thanks,

Jim

Re: Corner Cabinet Hinge Issue

#2

Re: Corner Cabinet Hinge Issue

FredD

Well there is Soss hinges that are invisible and easy to install , then a every simple hinge you can buy or make consists of a stud in the top and bottom edge of the door that fits into a hole in the top and bottom of the case.

Then knife hinges which are not quite invisible but close.

FredD

Re: Corner Cabinet Hinge Issue

#3

Re: Corner Cabinet Hinge Issue

Keith Newton

If I understand the parameters, it will need to be an inset hinge, which you should be able to find in several options for degrees of opening. You can glue a block on the back of the style for the high mounting plate, for a straight neck. Or you can use the thin plate with the big goose-neck.

While you are at it, ask for soft close hinges. They have a real calming effect at the end of those plate throwing episodes. Just kidding of course.

Re: Corner Cabinet Hinge Issue

#4

Re: Corner Cabinet Hinge Issue

pecker

Blum makes some 26mm hinges, though you'd have to research if any of them will suit your needs.

Re: Corner Cabinet Hinge Issue

#5

Re: Corner Cabinet Hinge Issue

Jim

Thanks, All. Still not sure what to do. If I put a block on the back for the 35mm hinge, seems like that would throw off the hinge. Have you tried this before?

Re: Corner Cabinet Hinge Issue

#6

Re: Corner Cabinet Hinge Issue

JimG

Thanks, Keith.

Could you post a link to the type of hinge you are referring to? I'm not recognizing it from your description.

Thanks, JimG