Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

ose anyone have any idea what these could be?

Posts

ose anyone have any idea what these could be?

#1

ose anyone have any idea what these could be?

kellyanderson72

I got these in a box lot at an auction last weekend. I have no idea what they could be for. They are almost 13" long with a 8" long...blade if that is what it is. The blade starts out round at the handle and then flattens out to almost a flat oval shape and comes to a pretty sharp point. Wood handle with a flat on one side. They say Chatillon Made In USA on the blade. When I google Chatillon I come up with a town in France. Any one have any idea what they are?


Re: ose anyone have any idea what these could be?

#2

Re: ose anyone have any idea what these could be?

Tom Dunlap

http://www.sotherden.net/FOSTERKNIVES1.htm

http://www.bladeforums.com/forums/showthread.php/311460-John-Chatillon-amp-sons

Sailmaker needle???

http://www.blujay.com/item/CHATILLON-Antique-Sail-Maker-or-Leather-working-long-Needle-Fish-Net-canvas-17010000-3711325

Sharpener???

http://home.rica.net/toolman/

Re: ose anyone have any idea what these could be?

#3

Re: ose anyone have any idea what these could be?

kellyanderson72

Thanks. The sail makers needle looks closest. Since there is an eye in the end and it is over 15" long it looks like mine have been ground down some for another purpose, I wonder what that would have been.

The previous owner was a machinist/woodworker who it was said many times at the auction could fabricate just about anything so it would be hard to tell what it could have been used for.

Re: ose anyone have any idea what these could be?

#4

Jesper, Denmark

Re: ose anyone have any idea what these could be?

Jesper, Denmark

It's not sailmaker's or sailor's Fids, they need to have a much steeper curve to the blade to separate the strands in a rope.

They might work for very small lines, but then would be too long to be practical.

Re: ose anyone have any idea what these could be?

#5

Moses Yoder

Re: Bearing scrapers

Moses Yoder

The flatter one looks very similar to a bearing scraper I have, and the other one was probably for the same prupose, just different shape. I think they were used on the old babbit bearings, to true them after pouring.

Re: ose anyone have any idea what these could be?

#6

Re: ose anyone have any idea what these could be?

John Veerkamp

except for the eye you mention, they look like sharpening steels.

Re: ose anyone have any idea what these could be?

#8

Re: ose anyone have any idea what these could be?

Howard Acheson

The one with the eyelet was an old tool used by sailmakers and/or leather workers. The long, thin tool was used to work a hole in thinner material or leather that a threaded needle could be inserted through. Many old time sailmakers needles where triangular in shape. They pushed through material easier supposedly.