We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I've finally gotten to the point where I'm ready to bite the bullet and buy a compressor. This would see light duty in the shop (if I ever get myself in there) but will probably see more general use in DIY projects and remodeling. Are there any I should consider? Avoid? I've been looking at those for sale on Amazon since I get free shipping there and WC gets a small kickback from them. The one compressor that caught my eye there was the Ingersoll Rand P1IU-A9 but I know them only from their old-time reputation but with the state of modern manufacturing they might be made of pot metal in North Korea by slave labor by now and I wouldn't know it.
I have a double-hotdog Hitachi oiler that's delivered on a bunch of remodeling. It has two outlets if that's important to you. It's heavy, so if I were to want to move it around a lot, I'd mount it on a cheap handtruck. Otherwise, it's great.
I have three air compressors here. The oldest one I put together 30+ years ago over a couple years. Don't ask me why I did that because I certainly can't justify doing it that way now. The second one is a Campbell-Hausfeld(sp) pancake. The third is a Husky from HD that actually belongs to one of my sons. The C-H is the one that gets used all of the time. I have been surprised that it has worked well for 12 years now.
it look like it mite be ok here is the discripson , It is not pop metal Ingersoll Rand P1IU-A9 Hand Carry Twinstack 2-HP Compressor
$238 online amozon has it
Features include continuous duty cycle rating, cast iron compressor pump, minimum 5,000 hour pump operating life. Maximum pressure is 135 PSIG. Ingersoll Rand Air Compressor P1IU-A9 Features & Benefits: 4.3 CFM @ 90 PSI 2 HP 135 Max PSI 115-1-60 Voltage 4 Gallon twin-stack Cushioned hand grip "
I recently purchased a Hitachi twin hotdog compressor from Lowes. It is a direct drive but is an oiled type. I personally would not purchase any oil-less compressor as their track record is pretty poor. I know that during testing at the former manufacturer where I worked before retirement, the compressors were hooked to motors (to test the drive motor) per information from the Engineers at that location it was required that they run a certain life cycle. I was told that in almost every case the test had to be halted and the compressor replaced to finish the test. I have a large (60 gal cast iron) compressor in the shop, but wanted to use one for inside the house for finish work. I don't have a lot of time on the compressor, but it is much quieter than any of the oil-less units I have heard. It builds pressure quickly, has easy to reach and adjust regulator etc. It is a little heavy to tote around, but otherwise I am quite satisfied. Regular price was $200, marked on sale at $160, when I purchased it they said they were out of stock so sold me the display unit for 10% off, suited me fine.
I have been thinking about getting a little compressor, and I think that will be it. I have had a twin tank Rol-air for ~30 years, that I have used daily, without ever having a single problem. I think they know how to engineer a good product.
A google search has a good youtube video, which shows it being run through several guns, that paint a good picture of what to expect.
Re: Recommendation for Small Air Compressor? *LINK*
Jim Dillon
John,
I have a 16 year old Emglo hot dog that has served me well. I think Dewalt bought them out and have painted it yellow. If it is the same, then I would buy another if mine broke. Here is the link to the DeWalt compressor offered by Amazon.
But (2hp double tank) it's good for nail guns, staplers, blowing up or out stuff. It can be used for conventional spray gun in a limited sense, but not at all recommented for HVLP. It carries well but on the heavy side. For what it does I've no complaints nor the price which was $60 at a flea market. Check out those kind of sales as the sellers don't want to carry it home. Heck I didn't want to carry it back to the car and I thought it was the deal of the day.
I also have a Senco one tank 1010. It's lighter but not nearly as versatile. Works great for mouldings though.