Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

glass panels

Posts

glass panels

#1

glass panels

Howard

I’m looking for a source of custom sized tempered glass panels for a set of cabinet doors I am making.

Thanks

Howard

Re: glass panels

#2

Moses Yoder

Re: glass panels

Moses Yoder

What you do is get the glass cut to size then get it tempered. So far as I know there is no way to cut tempered glass. What is your location? I can talk to a guy I work with and get you a company name and address, I think they are in Indiana. You would probably have to crate the glass and get it shipped.

Re: glass panels

#3

Steve Strickland

Re: glass panels

Steve Strickland

Interestingly, glass annealing ovens are also used for slumping. All you need is the molds and you can have curved glass panels for no extra cost. They make their molds out of dental plaster.

There's a company in Austin with a 12 foot elevating annealing oven. They do curved mirrors for flight simulators and annealing for large optics. Curio cabinet glass would be a snap for these guys. They also do edge bevels and polishing.

Re: glass panels

#4

Re: glass panels

Thomas S Stockton

Howard

Talk to your local glass shop, I don't think you will save anything by having it shipped unless you are buying hundreds of pieces.

I would get a couple of quotes as I have found glass shops to be all over the place on pricing, but they do this stuff all the time and can talk you through any questions you have.

Tom

Re: glass panels

#5

Re: glass panels  *LINK*


pecoglassbending

Re: glass panels

#6

Re: glass panels

Brian Aust

Howard, I've had good luck with Blair Glass in Nebraska.

Re: glass panels

#7

Consider laminated glass......

Dick Coers

It's the same as car windshields, and can be cut at a local shop. The plastic in the middle will not let go of the broken glass, so is safe. My local shop scores both sides, pours lighter fluid on the score, then lights the fluid. When the plastic softens, the glass will bend away from the score and they cut the plastic with a razor blade. It's fun to watch! They have done curves for me as well. I did a door for a strip club that was to look like champaign bubbles. They did circles of laminated glass to cover colored glass. Looked great. The delivery was kinda fun, but too bad they wanted it delivered during the day, shoot!

Re: glass panels

#8

Re: Consider laminated glass......

Thomas S Stockton

They pay you in 1 dollar bills