Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Slotted Screwdriver, anyone?

Posts

Slotted Screwdriver, anyone?

#1

Moses Yoder

Slotted Screwdriver, anyone?

Moses Yoder

When we were growing up, tools were rare and expensive. If my dad caught us messing with his tool box, it was a sure spanking. When I was a teenager, I wasn't sure what I was going to do with my life but I knew I would have to have tools to do it, so I was kind of worried. I knew tools were rare and expensive. So maybe that's where my obsession with collecting tools comes from.

Yesterday my neighbor came over and asked if I had a regular screwdriver he could borrow. I said "You mean just a straight screwdriver for a slotted screw?" And he replied "Yea, I need to take off my license plate." I thought about it for a minute. I was debating which of the 4 toolboxes I should go into, and which of the 10 or so slotted screwdrivers would work best for this situation. I ended up deciding to give him my good one, since it was for a short term project, and a size that fits big license plate screws. As he walked away with the screwdriver I thought "Boy, tools are rarer and more expensive than I thought." I mean, it does make me feel useful to have a neighbor that knows I have any tool he might need, but really; he doesn't have a slotted screwdriver?

Re: Slotted Screwdriver, anyone?

#2

Sure, dinner knife or a coin! 

Re: Slotted Screwdriver, anyone?

#3

Re: Slotted Screwdriver, anyone?

Barry Irby

I had ONE neighbor I would loan tools to. He brought them back as good as they were when they left. If he perceived any damage on them he would have them repaired or would replace them. He would take my chainsaw in and have it tuned up and the chain sharpened. He had some tools I borrowed from time to time and I treated his as well as he treated mine.

My other neighbors are on their own. None of them have any tool I would want to borrow and don't seem to understand they might want to reciprocate. If one of the other neighbors wanted to borrow a slotted screw driver to change a license plate, I might change the plate for them, but would not loan them my good screwdriver. Too many bitter experiences.

My older son is not into tools. I asked him to hand me a screw driver and he Asked "A PLUS or a MINUS?" Works for me.

Re: Slotted Screwdriver, anyone?

#4

I Have Several

Mark Mandell - Gone Round In Jersey

They made good pry-bars and paint can openers.

Now, as far as slotted screws, though, I got rid of all of those in my rhelm 10 years ago.

Re: Slotted Screwdriver, anyone?

#6

anyone headed to college?

Bill Tindall

When my daughters went off to college I equipped them with a large ammo box filled with tools- screw drivers, pliers, hammer, utility knife, egg beater drill and bits, tape, adjustable wrenches, etc. Not only did it provide the means to fix a multitude of stuff, they quickly became a valued contributor to dorm life. Everyone soon knew the girls that would have a hammer, for example. Both daughters still have THEIR tools, even after marriage.

I suggest if you have someone special headed to college give them a gift of an equipped tool box. The 50 cal. boxes are ideal.

Re: Slotted Screwdriver, anyone?

#7

I did just that

Bruce, a MN Galoot

and she has all of them, still.

However, I followed your advice at the time and got her the cordless drill that I preferred, because as you put it (to paraphrase) what tool would I want to use when I went to visit?

However #2, I don't need to use them because she was taught well and knows what to do with what she has, and she's not at all afraid to improvise.

Re: Slotted Screwdriver, anyone?

#8

A dating question

Tom Dunlap

On one of the first dates with the gal that I'm seeing she looked into my van, which was filled with lots of 'stuff' in a hodge podge mess. She asked me if I had a Phillips screwdriver. The question came out of the blue since there wasn't anything loose or needing repair. My reply was, Yes, which size, I have several. That as the right answer it turned out. She was testing to see if the rest of my life was as disorganized as the back of my van on that day. I told her that I had the screw drivers right there in the four drawer tool box strapped to the shelf. When she came to my workshop she saw the two multi-drawer metal toolboxes...with the drawer for screwdrivers, as well as the row of five, four drawer file cabinets filled with tools and 'stuff' and labeled on the front with the contents.

She gave her daughter a toolbox full of assorted handtools for high school graduation. Her daughter still has the toolbox too!

Re: Slotted Screwdriver, anyone?

#9

Re: Slotted Screwdriver, anyone?

steve mackay

Its not just tools. Though I share your reverence. Its everything now. I was horrified that my father in law was going to hire out painting his hallway ceiling. Just the hallway mind you. He has five daughters and almost as many sons in law to match plus a grandson. My folks bought a wreck Victorian. THAT was my childhood. Dad is/was a tool & die maker (hence the tool Jones) and all round handy guy. What we didn't know we learned. I could sweat fit at 10. Pour concrete by 12. Now, hand someone on the street a tape measure and see who can read it. JUST read it ! 80% will be baffled.

I hope your guy didn't use the GOOD driver to PRY the plate off !

Re: Slotted Screwdriver, anyone?

#10

The loaner box

Thomas Skaggs, Foothills of Mount Level

For me it's a little simpler. As I amass newer or better tools over the years I relegate old ones to a box that I am happy to loan from.

If what you are looking for isn't in that box you might be out of luck. I don't loan my good tools!

Tom

Re: Slotted Screwdriver, anyone?

#11

Re: anyone headed to college?

Nick Tuzzolino

I did just that, also. It proved invaluable. Excellent idea.

Re: Slotted Screwdriver, anyone?

#12

Re: The Surplus Situation

George Colonel's Workshop-Havertown PA

Good Morning Tommy,

My tools have always been objects of care, and I have amassed a bunch of them used and from my Father's shop. I may loan a tool, but would rather do the work myself for neighbors and relatives. Some tools have "walked" due meter readers, electricians, carpenters, etc. Now my wife or myself are always present when a stranger is in the home. I've upgraded my tools throughout the years and don't have room for redundancies. So When I get a new tool, the old one gets given to one of my kids, or is sold. I am in an enviable position now that #3 son has his own contracting business. He has the tools I don't have, and is happy when I gift him some surplus/seldon required tools, like a half dozen 6' bar clamps, my first router table, and a 14" blue Jet Bandsaw.

George

Re: Slotted Screwdriver, anyone?

#13

Giving notice

Gary Smyth

Over the years I’ve collected tools and moved at least eight times with a “permanent” address. Each time I’ve moved the company would pay for only so much. Tools are heavy. So I’ve weeded tools to those that are tested, tuned, and that I use often for whatever whim strikes me. Most tools are woodworking, but there are also drafting, engineering, auto, and metal working tools in the mix. Since living in Western Pennsylvania however I’ve run into various neighbors that have left frosted mugs on my table saw, returned a chain saw outside my door with a broken chain, used one of my chisels as a lever for a Formica cabinet top, snuck rebar on my band saw, delivered a 100 foot tape rolled up but caked with concrete, returned a half sheet sander with no pad, and dulled my spank'in new 1/2” jobber bit drilling granite. So far no mention of the tool condition upon return. I like my neighbors, but as far as tools are concerned they just don’t care. (I say that rather than ill mannered.) I decided to be passively aggressive. This sign will soon be prominently displayed where my neighbors find me most often. I'm pretty sure they can read.

Re: Slotted Screwdriver, anyone?

#14

Re: Giving notice

Thomas Skaggs, Foothills of Mount Level

I have an old cheap circular saw that I'll loan. Over the years the cord has gotten shorter and shorter. It's ok as long as I get both ends back.

Re: Slotted Screwdriver, anyone?

#15

Short tailed

Tom Dunlap

Once the neighbors have whacked the cord enough time you'll have a three inch cord. Then they'll expect to be able to borrow an extension cord...to shorten likewise!

Re: Slotted Screwdriver, anyone?

#16

Re: Short tailed

Bruce, a MN Galoot

I once loaned a belt sander that came with an original 12' cord. My "friend" ran over that cord with a 60 grit belt and replaced it with a 5' one. I asked him about it and he said "what?"

Re: Slotted Screwdriver, anyone?

#17

Re: Short tailed

Brian in SLO

That would be a great respopnse when asked to loan a tool. "What?"