Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Feed-N-Wax for Finishing

Posts

Feed-N-Wax for Finishing

#1

Feed-N-Wax for Finishing

Richard Steussy

While searching for a product to seal and finish my segmented bowls, I accidentally discovered Howard's Feed-N-Wax at my local Ace Hardware. What a great product! This replaced a concoction of beeswax and mineral oil that I previously used. It saves the preparation trouble and is affordable--$10.95 for 8 oz. And it lasts a long time. I applied it to bowls that I had freshly made and WOW! I was amazed. It works better than the expensive wax preparations I got previously from the woodworking catalogs. And it gives the natural feel I desire, protects the surface from food and can be re-applied at leisure. All I can say is--"Try it--you'll like it!"

Re: Feed-N-Wax for Finishing

#2

Re: Feed-N-Wax for Finishing

FredD

Your 100 % right Richard, I have used Howard's

Feed and Wax since it came out in the early eighties, I gave every new Kitchen client a bottle of it and my wife has used it to maintain our maple counters for years.

FredD

Re: Feed-N-Wax for Finishing

#3

Another frequent user

doug f, san clemente, ca

I've used the stuff for about 10 years, but mainly as a cleaning aid for older furniture. Feed-and-wax plus some really good 0000 steel wool leaves a very nice finish AND leaves the old patina as well.

Doug