Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Walnut & Walnut Burl Side Table

Posts

Walnut & Walnut Burl Side Table

#1

Walnut & Walnut Burl Side Table

Hikmet C. Sakman Victoria, BC CDN

Hi Again,

This piece also went to the same clients who ordered the large coffee table posted down below.

Sides and top are done with 4 way-match burls. Front and back were done with 2 pieces bookmatched burl veneers.

Only contrasting thing is the ebony string/madrone inlay I made.








Again, sorry about the lousy photography. Door is hinged with invisible shopmade barrel hinge, which is super smooth and locks in place with a discreet cork-lined stop and 5/16" dia. Brasso ball catch. Door is operated with an ebony knob on the right side.

Note the careful grain selection and matching on the outer frame members and legs. This process is the most time consuming part in my opinion, depending on how well the wood cooperates with me.

It is 22" high, 24" x 30" top. Finish is once again hand rubbed varnish.

Thanks,

Chico...

Re: Walnut & Walnut Burl Side Table

#2

Re: Walnut & Walnut Burl Side Table

Carol Reed, Strawberry, AZ

Beautiful! You are amazing!

Re: Walnut & Walnut Burl Side Table

#3

Re: Walnut & Walnut Burl Side Table

John Pappas

Chico, your work is inspiring. Love it.

Re: Walnut & Walnut Burl Side Table

#4

Easy on the eyes

Bill Tindall

The objective of so many "modern" furniture makers is to put their stamp on the design and in the quest to be unique the result is often, at best, strange. A second critique is that many rely solely on a particular shape or figured piece of wood and the rest of the design looks like high school shop class. Your pieces are invariably just plain pleasing to look at, with the attractive and interesting design enhanced by the selection of wood species and grain orientation. They would look attractive if made from plain maple. The figure and orientation is the icing on the cake.

The top edge treatment appears to be a "bull nose". If so how do you prefer to make this profile? It is a favorite of mine and I haven't settled on the best way to execute it.

Could you tell us more about the hinging?

Finally, what kind of varnish do you prefer?

Helpful hint. Load free InfanView photography software. Bring up a JPG picture on the screen, right click and open picture in Infanview. Click "Image, Effects, Unsahrp Mask" and save. This process will crisp up the fuzzy edges of pictures. I tried it on your picture #1 and the result was a sharp image except for the lower leg section.

Re: Walnut & Walnut Burl Side Table

#5

Re: Walnut & Walnut Burl Side Table

FredD

The end panel in the second photo's grain match strongly remains me of some India/Arabic geometric design, very well done Chico.

FredD

Re: Walnut & Walnut Burl Side Table

#6

Spectacular!!

Barry Irby

I just love it....

Not only is that burl fabulous, but the attention to matching the grain is icing on the cake.

Chico, did you resaw those carefully matched leg pieces and book match them? Or, did you just carefully choose pieces that appear book matched?

Re: Walnut & Walnut Burl Side Table

#7

Re: Walnut & Walnut Burl Side Table

Alex Grigoriev

The third picture shows me an alien face in the burl.

Re: Walnut & Walnut Burl Side Table

#8

Caramba!

Jorge Castañeda

Another stunning one.

Nice to see you posting again

Re: Walnut & Walnut Burl Side Table

#9

Awesome-as usual!

Don Orr

Love the burl and the grain orientation on the legs. Your clients have good taste.