Freud Fusion!
Dale Penkala
I posted about a week or so ago about this blade vs the WW2 and got alot of good feedback. In the end I ended up going with the Fusion. I just got it today and tryed it out on some 1-5/8" red oak and just wanted to give my feedback on this blade in case anyone might be thinking about getting one of these.
1st I bought the blade from Amazon.com for 80.00 with free shipping. Once I got the package I could see why it was free shipping. Anyway I got it out of the box and the first thing I noticed is how sharp the blade was! Razor sharp! Got it mounted in the saw and double checked alignments and all and decided to cut the taper on 4 legs for a table I'm making out of red oak that was 1-5/8" square. This was done on a taper sled that I made and riped down the leg 25" of the 28" of length. Cut thru it like butter and I literaly can go right to 180 grit sand paper and probably go to 220 grit if I wanted to. Normally I would use 100 to take out blade marks. Couldn't believe how smooth the cut was!
I've read alot on this blade and most people say that it has the tendancy to burn ripping stock. I didn't see that with what I did this evening but I'm looking forward to doing more with the blade!
Something I wanted to mention to everyone that is considering this blade is in my original post it came up that Freud didn't offer any kind of resharpening service for this blade. When I took the blade out of the sheath inside was a folded up users guide and toward the back it talked about resharpening the blade and that Freud offers this service with fast turn-a-round times. I was really considering the WW2 just because of the resharpening service but now I'm really happy, not only with the blade but also the fact that they now have a resharpening service.
Thanks!
Dale in Mid Michigan



