Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Shop is well underway (video link)

Posts

Shop is well underway (video link)

#1

Shop is well underway (video link)

ron

I did a quick walk-thru video for you guys to witness on youtube. I started asking questions about shop design and such about a year ago on this forum. You've been a great help. I'm still a couple of years from retirement, but this is where I'll be hanging out a lot then.

(www.youtube.com/watch?v=Bpk0kl9sbh4)

I obviously owe a lot of design to David Howerton's pictorial essay (http://picasaweb.google.com/111054095273118925044/ShopConstruction?gsessionid=C2JMIRMWYQLsXU3ACwrJyA) which was posted at Woodcentral.

Re: Shop is well underway (video link)

#2

Re: Shop is well underway questions

Gary Smyth

What's all in the floor boxes? electrical conduit, vacuum pipe (if so what kind), water drain? Where do they lead -- electrical panel(s), outdoors, central run? Is there a clean out? How wide is the boat garage? I didn't see a steel beam anywhere in the area. Is there any intent to install one for a rolling hoist for heavy moving? Your space is, I'm sure, many of our dreams. Keep your shop tour and commentary coming.

Re: Shop is well underway (video link)

#3

Re: Shop is well underway questions

ron

Gary,

The underslab dust collection system (all 6" pvc) flows to the corner location of the dust collector. The main trunk runs diagonally toward the small front doorway, with "tributaries" to the intake boxes. All done with minimum lengths and wyes, except for the 90 degree upturns at the boxes. No clean outs or drains. I'm counting on the large pipe diameter extricating me from future problems. No air lines in those boxes either. The wallside boxes have no power in them. The two midfloor boxes have conduit to the main panel; one gets 220 and one gets 220 and 110.

The boat bay is 10' wide, it's just for a narrow river runner type of craft. But they're rather long with a trailer. There's only one doorway along that wall although it looks like 2 because we were replacing some bowed studs. No overhead steel or even beefed up support for a hoist or such. Thought about it, but the builder had enough struggles in undertaking new things, especially with the underslab stuff, and then there's my budget to consider. The truss system is simple and is cost effective as a consequence of not adding more load. I was quite happy to be spanning 32' as it was.

Yep, I'm pretty excited about it, and feel very lucky to have it.

ron

Re: Shop is well underway (video link)

#4

This is almost too early

Bruce, a MN Galoot

for a YOU SUCK! but I'll post it anyway.

That is going to be one gorgeous shop! You've learned your lessons very well. Please keep us up to date on the progress. It's actually just what I have in mind for my retirement ( in a different place).

Well done!

Re: Shop is well underway (video link)

#5

thank you

Ron

often it feels like the majority of what I know about woodworking came from WoodCentral or Badger Pond.

I sure appreciate all the mentoring I've gotten -- even the advice I turn down.

ron