Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

5 Minute Fan Install OT

Posts

5 Minute Fan Install OT

#1

5 Minute Fan Install  OT

Dustmaker Mike

Well the LOML wanted a ceiling fan in our room. So we went and found a fan at HD that said 5 minute install. We both liked it and bought it. After about an hour of getting the correct box and a trip to the BORG I was ready to install the fan. It took almost an hour to get it installed but it don't wiggle and it works. So I guess I am pretty bad at installing things because it took me so long)-;

Re: 5 Minute Fan Install OT

#2

Re: 5 Minute Fan Install  OT

FredD

Not really Mike , the times for things like that stated on a box to sell you in the most favorable light are generally wrong with the possible exception of a Electrician who does it on a frequent basis and has everything with him all of the time , that you had to go to the store for.

In your line of work , it would work the other way for anybody not familiar with it.

FredD

Re: 5 Minute Fan Install OT

#3

Re: 5 Minute Fan Install  OT

Bill Houghton, Sebastopol, CA

I doubt even a licensed electrician could do it in most houses, unless the existing ceiling box was already fan-rated and had all the proper wiring.

Actually, your time frame was pretty good.

Re: 5 Minute Fan Install OT

#4

Re: 5 Minute Fan Install  OT

Al Goldstein

Mike I installed the same fan two weeks ago. Five minutes my butt!

Your time was pretty good especially with the extra time involved to set up the fan switches for the remote control.

Wish I had installed a ceiling fan years ago!

Re: 5 Minute Fan Install OT

#5

Re: 5 Minute Fan Install  OT

Barry Irby

On all the ones I have installed it took me over five minutes to get it out of the box. Let alone assemble it and install it. Even if the box was already setup I think and hour would be very good.

Re: 5 Minute Fan Install OT

#6

Similar experience-different product

Warren White

I won't bore you with the details, but I just put in a doggie door which attaches to the opening in our neighbor's patio door. Instructions were 1, 2, 3, 4, 5, 6. Should have been 2, 1, 3, 6, 4, 5. They said they would tell their "engineering department.'

Obviously, their 'engineering department' has never installed one of these. Good quality product; plain lousy installation instructions.

Re: 5 Minute Fan Install OT

#7

Poor instructions....

Barry Irby

You said "Obviously, their 'engineering department' has never installed one of these. Good quality product; plain lousy installation instructions."

I suppose its too much to expect that the people that sell you things have some understanding of how they work and what is required to install them. I recently bought a number of bi-fold doors at Lowes. Part of the process it to install the hardware and install the doors and if necessary, take the doors down and remove the plungers and trim the doors. I worked very carefully to remove the plungers from a set of doors, but ruined them. I thought Lowes should have spares, either free or at a reasonable cost. This is one of their standard doors and they sell thousands of them. I was amazed that not only did they not have spares, they did not know that he doors came with a package of hardware and had no idea what it looked like, how to install a door, or anything about it. This was the salesman (a woman I like and made a point to purchase from), the area manager or the store manager. I was perfectly willing to buy new hardware, but what they had for sale did not match the doors and would not fit. Its this sort of thing that adds two or three hours to a thirty minute job.