Carrying a Screwdriver thru the Airport
Barry Irby
I posted below about making a rocking chair/horse (Charlie Horse II) below. My son has carried it through the air port to Florida to deliver it to my grand daughter. To reduce the size of the package, I left it disassembled and flat packed it into a cardboard box. Included were about a dozen Kreg Screws and as square drive screwdriver for him to use to assemble it. (Also, some glue and steel wool and sandpaper, for touching up the finish if necessary.) The screwdriver was thoroughly wrapped in bubble wrap and taped up to prevent it damaging the horse or the box. The box was securely taped. He wanted to carry the box on for fear they would lose it and especially so because he had a very short layover to change planes.
Security scanned the box and spotted the evil screw driver. They opened the box and removed it and scanned it again while still in the bubble wrap to be sure it was just a screw driver. Then they removed the bubble wrapped and checked it against their standards. It was an eighth of an inch too big. Mean while they have examined the horse again and looked at the screws. They searched my son again. They decided to let him keep the screwdriver, but not to wrap it back up or put it back in the box. He had to put it in a side pocket on his backpack. I doubt I will ever see that screw driver again. Just glad to know they are vigilant and oh so logical.



