Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

You know it is time to clean your shop when...

Posts

You know it is time to clean your shop when...

#1

JL

You know it is time to clean your shop when...

JL

you find paw prints on top of your band saw! I admit, I did a lot of sanding in the past couple of weeks before I got my air cleaner. I hadn't touched my band saw in a while. I got the shelves out of my shop and finished - now I can finally get to the nooks and crannies. I didn't expect to find paw prints on the band saw table.

How did she get up there?? She's only 4 months old and not very big.

Re: You know it is time to clean your shop when...

#2

Re: You know it is time to clean your shop when...

Bill Turpin in WNC mountains

It is time when the shavings cover up the Powermatic. That mustard color should always be visible.

Re: You know it is time to clean your shop when...

#3

Moses Yoder

Re: You know it is time to clean your shop when...

Moses Yoder

I suspect you are talking about a cat. We trained our cats to jump a 30" gate to get to their litter box and cat food, because we don't want the dogs in there. They jump 30" like it's nothing, and did so at about 3 months of age. I suspect your band saw table is about 42" off the floor, a moderate challenge maybe for a 4 month old cat but doable.

I usually clean the shop every 5 years whether it needs it or not.

Re: You know it is time to clean your shop when...

#4

Re: You know it is time to clean your shop when...

Howard Norman

I usually clean the shop every 5 years whether it needs it or not.

Moses, why so frequently?

howard

Re: You know it is time to clean your shop when...

#5

Steve Strickland

Re: You know it is time to clean your shop when... 

Steve Strickland


img

Re: You know it is time to clean your shop when...

#6

Re: You know it is time to clean your shop when...

Jesse Cloud

Time to clean when you spend 30 minutes looking for a six inch ruler and find six of them.

Re: You know it is time to clean your shop when...

#7

Re: You know it is time to clean your shop when...

George Colonel's Workshop-Havertown PA

Good Morning JL,

I try to give my shop a twice-over when I conclude each major project. That usually involves vacuuming the floor, and all wooden tool boxes stored on base cabinet shelves, and the complete of tools to the wall mounts and to dedicated tool boxes.

My last effort resulted from acquisition of new worktops, and modification of the base cabinets. This actually led me to (gasp) SOAP and WATER. I use that stuff every dozen years.

George

George

Re: You know it is time to clean your shop when...

#8

Re: You know it is time to clean your shop when...

JMOHNIKE

I read an article years ago about a man who, for its time, had a state of the art woodworking shop. The shop building looked like a play house, the inside all hardwood floor, lighting, no problem,heated and cooled, all new tools, power and hand and no dust, stains or glue anywhere. He always wanted a woodworking shop, but he never used it and never intended too. I would rather see a shop in use, dusty, cluttered etc. rather than one neat an clean and never used.

Re: You know it is time to clean your shop when...

#9

Steve:  Is that before or after?

Neal in San Jose

I think I've only done a wall-to-wall cleaning twice in my life (moving doesn't count). I'll start with good intentions, but after a short while and cleaning a small area, I'll get distracted by one of the projects I've uncovered by that time.

Re: You know it is time to clean your shop when...

#10

I have a cleaning maid that does mine

Bill Tindall


Grand daughter wanted to learn to do woodworking. Step one in the apprentice program is "Shop Vacing". When this task is mastered we will move on to "bench brushing".

She was fascinated by dovetail chopping. One can see her chest of drawer side on the bench. She intently watched every dovetail chopped for the drawer dividers. She helped knock them into place for assembly. But start a machine.....gone. She hates machines. May be a good candidate for the hand tool forum.

Re: You know it is time to clean your shop when...

#11

Re: You know it is time to clean your shop when...

Larry Clinton At Frankfort, (Central) Indiana

I have (really have) been making an effort to clear mine up, mainly because the bandsaw and table saw offcuts, air lines, extension cords, unused board lengths leaning against tools and 2 uncompleted projects have made it a major excursion to get from one side of my shop to the other. I do have to cut up some scrap cherry (used after soaking to smoke meat in my and my son's grill), stack up the unused boards and finish the projects. The sawdust hasn't become deep enough to worry me yet but do have to put up some of the tools so I can see what is underneath. Heck, I might find a treasure (or maybe Jimmy Hoffa). I guess if I wait a couple years though, I might be able to sell some of the stuff I find for antiques.

Re: You know it is time to clean your shop when...

#12

JL

Shop vac is bigger than she is...

JL

Re: You know it is time to clean your shop when...

#13

Ten things.....

Barry Irby

I am not good about cleaning the shop. So bad in fact that I have instituted the "ten things" rule. Before I start work I have to put ten things away or do ten things that contribute to cleaning the shop. Might be as little as returning a screw driver to the drawer or putting a router bit back into a rack. Empty a trash can, empty the DC, whatever, but don't start working on the current project until I have done ten things. Sometimes it turns into twelve or more, but if it weren't for this, I would never put anything away. My workbench was so covered in junk I never used it until I finally got around to cleaning it. There was nothing of value there, just junk.

Re: You know it is time to clean your shop when...

#14

You're moving 

John in NM

Re: You know it is time to clean your shop when...

#15

Steve Strickland

Re: how to really clean a shop

Steve Strickland

My old shop got so bad it was easier to build a new one than clean the old one.


img

Re: You know it is time to clean your shop when...

#16

Re: how to really clean a shop

FredD

From the Pic I would say you may have over ordered the Sand and Gravel ,unless your shop is Wal-Mart size.

FredD

Re: You know it is time to clean your shop when...

#17

Steve Strickland

Re: Everything's Bigger In Texas

Steve Strickland

but Walmart's from Arkansas. Our women folk have closets bigger'n halfa their stores. Texas gals've got more clothes, too.

Re: You know it is time to clean your shop when...

#18

Re: I have a cleaning maid that does mine

charlie belden

There's not a kid that's hung out in my shop during the summer who didn't really get into sucking everything that can be sucked into a 4" dust collector hose. Sucking a fly out of the air earns Special Bonus Point. Now the grand kids are into it and the piles of shavings around my lathe are fought over.

Kids. They sure keep things interesting.