Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

question for Mark Mandell - air filter

Posts

question for Mark Mandell - air filter

#1

question for Mark Mandell - air filter

Rick Snyder

Mark,

I have the same air filter(JDS-750) as you do. I posted a similar question about this filter some time ago and never got any replies. Questions.... How do YOU take the inner filter out of this unit, and how often? I've had my unit for four years now.

Thanks,

Rick

Re: question for Mark Mandell - air filter

#2

Answer for Rick

Mark Mandell - Gone Round In Jersey

On the side of the unit there is a thumb screw that holds the hatch. Unscrew and the hatch comes off.

Just slide the filters out.


I do it when I remember :\ to check them which is usually every three months or so ;) . How often you clean them depends on how much run time and how dust you're producing. If you're like me and run dust collection on sanders (plus on all the machines, of course) in a hobby shop. 2-3 months is probably a good interval.

BTW, I should note that in blowing out the bag filter section, you don't want to be going at it with 125 psi air as you'll risk tearing the filter. That'll be a $50 mistake which is what JDS likes to charge for their filters. 30 PSI is enough to blow out the fine dust or you can use a shopvac in blower mode.

Re: question for Mark Mandell - air filter

#3

Granger sells bag filters

Phil Joines

Re: question for Mark Mandell - air filter

#4

Youz Gotta Numbah?

Mark Mandell - Gone Round In Jersey

Hey Phil,

Looked at Grainger's selection but the only "pocket" filters with a descent [#12 or better] MERV rating were like $140 a pop. Unless I'm looking in the wrong place, that's almost 3 times what JDS sells for. Please post or email me a Grainger part number for what you're using.

Thanks

M