Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Mortise machines

Posts

Mortise machines

#1

Mortise machines

adambaum

All,

I am looking to purchase a benchtop mortising machine, preferably one of the bigger brands. Mainly for reputation and availability of service centers. I don't have a lot of requirements as I am a hobbyist and don't expect to use it more than 8 - 10 times a year. However, I do want quality.

Any recommendations?

Adam

Re: Mortise machines

#2

Re: Mortise machines

Kelly M. Robison

I have a General model # 75-050T and I love it. The great thing is that it swivels and tilts 180 degrees and it is a good heavy duty machine. I have several products from General and I've had no problems from any of them. I bought mine on sale a couple of years ago for $499.00. You can probably look around and get one cheaper but I liked the features on this one. Good luck,

Kelly in Port Orchard

Re: Mortise machines

#3

Re: Mortise machines

Bill Tindall

For occasional use I get by nicely with a drill press adapter. It takes the same bits as the dedicated machines and cost about $50.

Re: Mortise machines

#4

JET *LINK*

Mark Mandell - Gone Round In Jersey

still have and use it.


JBM-5

Re: Mortise machines

#5

Agree with Mark

doug f, san clemente, ca

Adam - I've had Jet Mortiser for a number of years. A couple of upgraded chisels and an X/Y vise and it has served very well through a number of projects. For the hobbyist, it does everything you want it to do.

Jet has fairly frequent sales and they can be had on Craig's List occasionally.

Doug

Re: Mortise machines

#6

I have the Jet too...

John in NM

Same one as Mark. Works fine for the size and I like having a dedicated set up for simple mortises. If it lacks anything it's a positive holding arraignment, but I don't expect that for the price really.

Mortiser chisels wear in btw, they'll be awful for a while, but then the inside of the chisel gets smoothed up through use and they start working really well. You can sharpen the chisels with stones of any flavor and the drill with a small triangular file.

I also turned mine around on the base to gain some more height. Work surface is now a couple of ipe battens that the base is screwed to.

I think Delta and Powermatic sell clones of this machine too, but it's been years since I was in the market so I may be mis-remembering.

Re: Mortise machines

#7

Re: Mortise machines - Powermatic here

Carol Reed, Strawberry, AZ

with a Grizzly cross slide vise. Sweet.

Re: Mortise machines

#8

Shop Fox #1671

George Colonel's Workshop-Havertown PA

Good Morning Adam,

Mine is 10 years old, and I have used it to make a housefull of furniture. I bought it because the Jet, Fisch, and Delta bench top machines available at the time were of smaller capacity, were not as robust, and were nearly equal in price. I augmented the Shop Fox with a cross slide xy vise from HF, and it is a pleasure to use. The xy vise holds the work down as you advance the chisel through the track of the mortise. Fast, accurate, and easy. I would buy it again in a heartbeat.

George

Re: Mortise machines

#9

Re: Mortise machines

Jesse Cloud

OK, I'll be the contrarian. Used to have the Powermatic benchtop mortiser. Maybe I would have appreciated it more if I were doing more of a production type of work, but I found it awkward to clamp with, messy, slow to set up, and it produced just ok mortises. Found a router and a simple mdf template faster, cleaner, and more precise, especially on curves.

Re: Mortise machines

#10

another JET

Dave Bair, Eaton Rapids, MI

Re: Mortise machines

#11

Re: Mortise machines

nateswoodworks

I have also had the Jet for around 10 years and it is a great machine, if you can swing the money you may want to consider the General Kelly was talking about, the tilting head and hand clamp would be really nice but you can make jigs to replace them both.

Nate