Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Heater for workshop

Posts

Heater for workshop

#1

Heater for workshop

Kelly M. Robison

I am building a workshop, 24 ft X 24 ft. It will be insulated and have sheetrock on ceiling and walls. I live in the Seattle area; winters not real cold but rains a lot. I am thinking about using a radiant heater [45,000 btu] propane type. It is a "tube type" that will hang from the ceiling. It's cheaper than forced air and better than a wood stove; any suggestions or ideas. Northern Tools has some on their website that I have been looking at [model # 16273]. I will have a HVAC guy install it. I am on a restricted budget with the "war dept" so I need to go cheap.

Thank you,

Kelly in Port Orchard

Re: Heater for workshop

#2

Jim DeLaney, Austintown, Ohio

Re: Heater for workshop

Jim DeLaney, Austintown, Ohio

I have a 35K Btu radiant heater in my 26 X 32 heavily insulated shop, and it works wonderfully well. Overall cost to operate is about $45 per month, and I'm in a considerably colder climate than you.

Prior to installing it, I was told that condensation/moisture might be a problem, but I've not had a problem. In your climate, that might be a bit more of a concern... :)

Re: Heater for workshop

#3

William A. Roland

Re: Heater for workshop

William A. Roland

Hey! Don't buy anytrhing, I'll send you some of our heat here in the south. All you have to do is figure out how to store it for the winter. Ha Ha.