Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Anyone fixed Gross Stabil clamps?

Posts

Anyone fixed Gross Stabil clamps?

#1

Anyone fixed Gross Stabil clamps?

paul in AZ

Assembling a case today I had not one but two Gross Stabil clamps slip. They are the 1 meter [-~36"] size. I cleaned gunk out of the serrations & wire brushed them, disassembled the clamping mechanism, reversed the plate inside, and still nada! Then I took apart the distal end, pulled everything off and tried to flip the bar over but the bolt holes in the bar are wrong so it couldn't be reassembled that way.

Anyone with ideas on fixing these? Or do they go into the recycle barrel.

Re: Anyone fixed Gross Stabil clamps?

#2

Take A Shot

Mark Mandell - Gone Round In Jersey

At sharpening the serrations with a "V" file. Have you e-mailed the mfg'r?

Re: Anyone fixed Gross Stabil clamps?

#3

Re: Take A Shot

paul in AZ

Gross Stabil clamps were bought out by Bessey several years ago. I called Bessey and was told that they shut it down, sold off all the product and there are no parts available. Also no service. Thats one way of gaining market share.

The thought of a small triangular file occurred to me but that bar material is pretty hard and there are a load of serrations to file out. I may still try it but not with much enthusiasm.

I'll try again to see if I can get access to the piece in the clamping head that grips the bar. That is the part that comes into play every time and it could be worn out. If I can get at it.

In the meantime I ordered a set of Woodcraft's clamps that were on sale. Made by Bessey, not as well as the real thing but at 4 for $100 worth a try.

Re: Anyone fixed Gross Stabil clamps?

#4

clamps still  available  *LINK*

del schisler

you can still by them here is the web address


http://www.buycheapr.com/us/result.jsp?ga=us13&q=gross+stabil+clamps