Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

What do you do about 7 1/4" blades?

Posts

What do you do about 7 1/4" blades?

#1

JL

What do you do about 7 1/4" blades?

JL

I had some of my 10" blades into the sharpener a month or so. It was about $0.30 a tooth for carbide blades. So ~$42 for the three blades. This is reasonably cost effective as a new blade costs ~$50+.

I'm needing to replace or sharpen some of my 7 1/4" blades. Okay, I can do the math. $0.30 x 24 teeth = $7.20. $0.30 x 40 teeth = $12.00.

It is ~$10 for a 24 tooth blade and $15 for a 40 tooth blade for the Freud blades. Less for Irwin, Dewalt and Avanti.

I'm probably going to just replace my blades - I was wondering if anyone bothered to sharpen the 7 1/4" nowadays.

Re: What do you do about 7 1/4" blades?

#2

Nope - Dispozables

Mark Mandell - Gone Round In Jersey

Also why I only by the Dewalt, V-A, and such on the sale rack; I know they're going into the metal scrap bin.

BTW, ditto on the 6"ers for the Saw Boss as well.

Re: What do you do about 7 1/4" blades?

#3

I do

Bill Tindall

But my blades are 40T premium quality 7 1/2 or 8" blades that I use on the table saw and they cost more like $20+. Also I am paying only about $10 to get them sharpened.

Re: What do you do about 7 1/4" blades?

#4

Re: What do you do about 7 1/4" blades?

John McGaw

It seems to me that all of the little blades have so little carbide on them that resharpening would be difficult if not pointless. Or have I simply been buying bad blades?

Re: What do you do about 7 1/4" blades?

#5

Make clocks out of them

Phil Joines

You can probably sell them for $25 a pop. :D