Wish I had a bigger shop! (Eye Candy) *LINK*
Leo Cuellar
A beautiful old machine going locally on craigslist. Not mine, just thought some of you might like to see it.
http://bellingham.craigslist.org/tls/2497709566.html
Knowledge You Can Build On — Est. 1998
Wish I had a bigger shop! (Eye Candy) *LINK*
Leo Cuellar
A beautiful old machine going locally on craigslist. Not mine, just thought some of you might like to see it.
http://bellingham.craigslist.org/tls/2497709566.html
NEAT-O !
steve mackay
Re: Wish I had a bigger shop! (Eye Candy)
George Colonel's Workshop-Havertown PA
Good Evening Leo,
The machine gleams with care and use. Nice to have that old equipment in use. I wonder if that multi tasker has modern accuracy.
George
Re: Wish I had a bigger shop! (Eye Candy)
Leo Cuellar
Hi George,
I couldn't see why not, presuming it had been well cared for the last hundred years or so. Until one gets to the level of total CNC machining, the quality of the output is still determined by the hand of the maker. I assume most of us do this for the joy of the making, which has been revealed in the work that so many choose to share here.
Leo
Re: accuracy
Larry Clinton At Frankfort, (Central) Indiana
As an Engineer, I would be willing to bet that the machine shown in the picture would have better accuracy than the current offerings. Quite possibly it would be a little harder to set up - but with the heavy construction the repeatability would be very good. Most of today's tools are designed with little or no extra material - IE: The designers use Cad / Cam to calculate the normal stresses during use and design the machine to meet that stress with very little safety factor. This reduces the amount of weight and material costs to produce the machine. In the days that machine was built material and labor were inexpensive so if they "felt" they needed a 4" X 2" beam - they would use a 5" X 3" to insure it would last. A similar analogy would be comparing a good cabinet saw to a contractor table saw. Both do the same job, but the cabinet saw is much more likely to hold dimensions with repeated cuts. If that unit was closer I would sure like to look it over and possibly purchase it, if the cost was in reason.