Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Multi Tool Question

Posts

Multi Tool Question

#1

Multi Tool Question

Barry Irby

I was walking through the borg and saw a display for the Dremel (I think) Multitool. The Picture on the display showed a sort of tuning fork looking attachment that had a very fine jewelers or coping saw blade strung on it. They showed it appearing to cope a joint. This what what I got at a glance. Has anyone else seen it? Does anyone own it and how well does it work?

I have the Bosch version of the Multi Tool and I like it, but I was unaware of this "blade". I have found the multi tool to be far more useful than I ever imagined. I bought mine on a discount/closeout and I am glad I did.

Re: Multi Tool Question

#2

Leo Cuellar

Re: Multi Tool Question

Leo Cuellar

Barry, haven't seen that attachment yet, but got one of those Bosch cordless multi-tools a while ago. Check out the "Trade-a-blade" section at the hardware store, they make adapters to allow you to run other peoples gizmos on just about any one of these things.

Re: Multi Tool Question

#3

Re: Multi Tool Question

Barry Irby

Leo, the Bosch tool comes with an adapter plate (washer) that allows the use of most anybody's blades. I am constantly amazed at how much use we get out of the tool. The only thing abut it I still resent is the cost of the blades. I haven't looked lately, but jig saw blades are cheap enough that I don't cry when one wears out or breaks, but these multi tool blades are about ten times as much. I tried some from Harbor Freight and they are a good value. Probably not the same quality as the name brands, but good for what they cost.

I paid $89 for the Multi Tool I have because it was on discount row at Lowe's. Glad I did. I would like to try a Fien, but I really wonder if it could really be four times better.

Re: Multi Tool Question

#4

Jason Roehl in Lafayette, IN

Re: Multi Tool Question

Jason Roehl in Lafayette, IN

I have the Fein, but I don't know if it's 4 times better because I've never used one of the less expensive options on the market. I can say that in one little bathroom remodel I did for a customer (new tile floor, new closet door, new trim and a paint job), I probably saved at least a couple-three hours by having one, paying for maybe a quarter of it. I was able to widen the closet opening from a 12" door to an 18" door without disturbing the drywall, not to mention the undercuts on the bathroom door, or scraping up the old vinyl tile, or enlarging the holes in the back of the vanity for the plumbing (since the tile raised the vanity about 3/4").

The downside is that as far as I can tell, the Fein uses only Fein blades, there is no adapter available. I did see your coping saw attachment on Amazon, and that looks like it has some potential, but I haven't found an analogous Fein attachment yet.

Jason

Re: Multi Tool Question

#5

Leo Cuellar

Re: Multi Tool Question

Leo Cuellar

I paid $120 for mine, but later got the 1/4" driver at Lowe's for about $70 bucks on the discount rack. I can tell you that one is at least twice as good as the Milwaukee one I have. It works especially nice for putting screws in a faceplate for turning, everything else I've used it for too. As far as Dremel's go, mine has a hand engraved "20166", & still works!

Re: Multi Tool Question

#6

Re: Multi Tool Question

Barry Irby

I have had a battery powered drill with the clutch for years. I sett eh clutch at "1" and found I could easily stop it with two fingers and very gentle pressure. I was mildly perplexed as to why you would want that. Later, I talked to the electrician who worked for me the time. (I was a builder.) He was ecstatic with that feature. Said it was perfect for installing over plate screws. He was right. Used it many times since then.

I bought the Multi Tool on a lark. My family gave me the drill and impact driver that use the same little batteries for Christmas. Its wonderful to have seven batteries and three chargers. My old Makita 12 volt drills used to seem just right. Now they seem huge.