Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

"Fitting" drawers . . .

Posts

"Fitting" drawers . . .

#1

"Fitting" drawers . . .

steve mackay

Nothing like "moving into" a new tool chest is there ? All kinds of room to spread out. For the "heavy" stuff (height gage etc) I put cleats and stops of wood in the drawer bottoms. I'd like to make "fitted" trays for the small stuff. I've poked and prodded one of my Dietzgen drafting set cases trying to figure out how they do it. I really don't want to cut it open for a look see. Anyone know the construction under the felt ?

Re: "Fitting" drawers . . .

#2

I have several drafting sets.  Most

Gary Smyth

of the modern ones have foam or plastic indentations the appear to be vacuum set over a form. My K&E sets have a plastic shell that is filled with foam on the back side. The presentation side appears to be flocked but is a thin fuzzy plastic or film covering glued to the plastic. I have a Chinese set that is wood cut outs. Labor doesn't seem to be a problem in China. Many engineering and machinist tools have machined cutouts in wood. Calipers by Starrett have wood cutouts.

Looks like a fret saw or scroll saw may be in your future.

Re: "Fitting" drawers . . .

#3

Re: "Fitting" drawers . . .

Bill Tindall

a picture in this case would be worth a thousand words but I will have a stab at it with words.....I have made thin strips and then cut slots half way through and then slide the opposing half slots together for the intersection of the dividers. Or, if you just want channels then use a router bit that cuts a round bottom groove and mill them.

You obviously can do good work. Time to move on to some heirloom furniture.

Re: "Fitting" drawers . . .

#4

Steve Strickland

Re: "Fitting" drawers . . . *LINK*

Steve Strickland

Would some styrofoam and a #11 Xacto blade do the job to just carve the shapes out? Some types cut best with a scroll saw. Then flock it with felt or coat with a hard expoxy finish? Styrofoam is easy to cast and machine. We had some telescope parts made that way that did great (with fiberglass finish). Styrofoam comes in all ranges of rigidity and density.

Polystyrene can be cut with a simple homemade hotwire. This works like a scroll saw and can be used on mills and lathes.


Styrofoam Hotwire

Re: "Fitting" drawers . . .

#5

The cat out of the bag . . .

steve mackay

:( I've gotten away with "I can't make a straight bookshelf" for years and years. "All I can do is these little model thingies." Now I've "told" on myself ! Oh yea, Da' Boss be think'n up all kind a stuff !

Re: "Fitting" drawers . . .

#6

Re: "Fitting" drawers . . .

Barry Irby

You can buy foam that is made for packing things for shipping. It comes in a pouch in an oversized plastic bag. You put your object in the shipping box with the bag and you burst the pouch and mix the goupy. It starts to expand and you close up the box. The foam expands the bag to fit the shape your object and fill the box. The plastic bag keeps everything clean.

I wonder if you could lay out your objects, cover them with some sort of cloth/plastic, clamp a mold over then and shoot the mold full of Great Stuff. The mold would be the same size as your drawers. Line the mold with plastic or some sort of release agent. A lot to play with here.

Re: "Fitting" drawers . . .

#7

I'm wondering about . . .

steve mackay

life though. How long before it starts to break down and crumble. I'll go hunting and see where it can be had. That IS a pretty clever idea.