Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

11 July 2011

Good Morning Everyone,

Well, I have a small woodworking project that my family doctor brought over but my problem is that the temps are too hot for me to work in my shop. Both my a/c units are out and need replacement and that takes money. Any extra money I have goes to travel back and forth to Alabama to visit my dad and do things around their house for them that they can't seem to get done or can't do any more.

Last week my youngest son, age 14, got his learners permit and his motorcycle permit. This morning, I'm taking my other son, 16, to take his motorcycle written test to get his permit. They will train with me for a period of 6 months before they take a motorcycle safety course and then they will be allowed to get their motorcycle license.

The day job has been keeping me really busy and I'd like to have more time to spend at home and in the shop. I guess we will see as time progresses.

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

Charles Yawn


Finished these six bread knives this weekend for future gifts. There are two oak, two walnut and two cherry with maple laminates on the handles.

Charles

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

Carol Reed, Strawberry, AZ

I dulled a bunch of small drill bits! By drilling metal, a heresy on this woodworking forum, I am told, that is sure to dull drill bits. Perhaps by next weekend I can show you what I have been drilling holes in. It IS woodworking related. Really. No kidding.

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments.... *LINK*

Nathan

Hello Dennis and everyone:

While my accomplishment pales to nothingness compared to Chico's fine Bubinga table, it's significant for me.

The basement at our house is part workshop, part storage facility. Yesterday and today I finally got around to installing a set of drawers in one of the metal racks. The roller mechanisms and drawer carcases are all metal, bought on the cheap years ago at the local Ikea "surplus/rejects" department. The rest I made myself out of natty scrap boards.


A coat or two of paint would be nice, wouldn't it? I posted more pictures and text concerning this project on my blog, if anyone is interested:


Nathan's blog - "Ikea hack" project

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

George Colonel's Workshop-Havertown PA

Happy Monday, Dennis,

I helped sponser the annual "Dartique" in my home and back yard. All my kids get to invite close friends, and it generally becomes massive in terms of numbers of guests and pounds of food. No exception this time. I got to show off the shop several times as kid's friends asked for tours. One angry find the next day was ruined cane in my dining room chair, and another on the seat of a nursing rocker we have in our bedroom--a grandkid did that, standing upon the cane seat while trying to open up my pipe cabinet! I had previously converted both chairs to accept sheet cane, so repairs won't be too daunting. I dislike caning immensely probably because I've done so much of it in the past.

George

Re: WC Weekend Accomplishments....

#7

reorganized 4 lumber racks

Bill Tindall


Things had become haphazard in several racks. I attacked the most offensive 4 of them this weekend. I wound up with one "empty" rack after consolidation to put all the strange stuff (like what I asked about in an earlier post) where it can be used up for internal furniture parts and farm needs. The first vertical row is 4/4 chestnut, 5/4 walnut, 4&8/4 poplar, 5/4 oak and poplar, 8/4 maple and mahogany. The second vertical row is 4/4 cherry, 4&6/4 ash, 8/4 walnut, 4 and 5/4 maple, and 4/4 red oak. The 3rd vertical row is 12" and wider pine and poplar, 12" and wider poplar and oak, 4 and 5/4 rift curly ash, junk, 8/4 oak and cherry. More walnut, cherry and white oak lies out of view. I sawed or bought some of this stuff back in the '70's and some is more recent.

Over time when I have had an opportunity to get above average lumber I have seized it. These purchases have been outstanding investments as the price of lumber goes ever higher and the quality gets worse as the better logs get exported or sliced for veneer. But I am in retired mode now and passed a chance at 3000 bdft of South American mahogany from a local plant that closed.

When I need to make something, say of cherry, I empty the cherry rack and sort through it for best yield and pattern. By having a lot to chose from I waste very little lumber in making cuttings for a project, but I do waste a lot of time sorting and deciding.

Re: WC Weekend Accomplishments....

#8

Re: how are they made?

Charles Yawn

Short blocks of wood are glued to an end of the long middle plank to form the hand handle. The whole thing is mounted on a lathe and the hand handle only is turned to your preference. Then the blade handle is cut out on the scroll saw (or thin-bladed band saw), shaped and sanded. A simple jig is needed to bend the blade handle out slightly so when the knife blade is mounted, the blade is stretched tight. The actual blade and screw set came from Craft Supplies. The idea comes from the article "Turned Handle Bread Knife" by Joseph M. Herrmann in the Summer 2004 edition of Woodturning Design. The rather long article includes directions with images, a template for the wood blank and instructions on making the bending jig.

Thanks for asking, Bill.

Re: WC Weekend Accomplishments....

#9

Fixed rotted porch posts

Bill Tindall


I used to enjoy the challenge of fixing something but that phase has passed. Been putting this annoyance off for a year. For some reason the bottom of the porch posts rotted on each end of the porch but not in the middle. Everything seemed well painted and raised up off the floor on 4 risers. The picture shows the offending section removed as well as the new section to be added.

Fortunately the center is a hollow square. So I fashioned a new post section, cut a massive tennon on it and epoxied it in place with a caulk seal at the joint. (I have lots of boat epoxy and not gorilla glue which is very pricey). After it set I planed the patch flush with the original post surface. Now I have to add a bottom molding and paint the patch.

Right now the porch is temporarily held up by 2 poplar logs. It looks very stylish that way for here in E. TN.