Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Wenge Entertainment Console with Quilted Maple *LINK*

Posts

Wenge Entertainment Console with Quilted Maple *LINK*

#1

Wenge Entertainment Console with Quilted Maple  *LINK*

Hikmet C. Sakman Victoria, BC CDN

Hello All Once Again,

OK I guess the password thing was causing the problem. Now I can see that posting page looks different with all kinds of new buttons on it.

It has been a very long time since I last posted anything with images in it, so excuse my previous posts and Ellis, please delete them.

My life has been very busy and changing (should I say ever-changing) but I think it started to level somewhat.

This is a solid wenge entertainment center with wenge veneered carcase parts and quilted maple panels.

Size is 60"x24"x22" (WxHxD) Finish is hand rubbed varnish. Quilted maple's 3D effect is hardly visible in these pictures but at least gives you an idea, but it is much more spectacular in person. Please fire away any questions you may have.

Thanks for viewing.

Chico...








My website

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#2

Re: Wenge Entertainment Console with Quilted Maple

FredD

Well Chico , you went and did it again, you made me envious.

FredD

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#3

Knob philosophy

Bill Tindall

I am about to face this problem on a chest of drawers so this is a good opportunity to get opinions. Metal knobs vs custom wooden ones. Wooden knobs, like on this piece, look indisputably sharp. But will they after 30 years of use? If wood knobs look like the keys on my keyboard after only a year of use are they are going to look grungy over time? I never put wood knobs on anything years ago to have any personal experience.

There is no end to what I can find to fret about when I am building something.

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#4

JL

Nice piece!

JL

What size are the knobs??

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#5

Re: For Such A Spectacular Piece

George Colonel's Workshop-Havertown PA

The knobs would need to be size 38D to be fully justified!

George

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#6

Re: Wenge Entertainment Console with Quilted Maple

Mark Valsi

Where did you get the figured maple ??

the piece is amazing !

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#7

Clint Searl

Re: Knob philosophy

Clint Searl

For me the determinant is whether the choice best integrates with and enhances the design. If I'm still here in thirty years, I'll have acquired more patina of age than a wooden knob.

Clint

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#8

Since you asked for opinions

Gary Smyth

I have to disagree. I would find it difficult to challenge the designers of quality classical pieces when a brief look around discovers ivory, sycamore, maple, and ebony knobs on some very expensive pieces. The Shakers might also disagree as would, some Sheraton pieces and light color keyhole inlays of all kinds of furniture and box styles that get heavy wear. Now there are few bigger fans of British brass than me, but the piece dictates the decision for handles, pulls, knobs etc. Rolltop desks have oak, Eastlake walnut, Pennsylvania chests use pine, Empire used pine, mahagony. Molesworth would favor twigs, antler, and bone. I cannot think of a style of furniture that hasn't been around for a hundred years with knobs other than metal. As an aside, it is the wear, dirt, grease, grunge on some of those parts that adds significantly to their value 30, 50, 100, or more years after it was built. I've seen your work here. My opinion to you is that you choose what you want because it is your piece. If you want to worry about thirty years from now, just think how cruddy that metal will get if used constantly. Thirty years from now you wouldn't take it off to "make it shine", you would let it grow old naturally and the owner will be more than grateful for your signature and date.

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#9

Re: Wenge Entertainment Console with Quilted Maple

Dick Coers

I'm a little concerned about the 3/4 view. I might have used wider bottom rails on the sides. You have the top of the side panel lining up with the top of the door panel. The bottoms are off by the wide of the door rail. I also might have made the pulls more linear. The whole cabinet is very linear, but you have those basically round knobs.

A very handsome piece with terrific craftsmanship.

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#10

Re: Wenge Entertainment Console with Quilted Maple

Ron Jones

Absolutely beautiful Chico. Going back to the days of Badger Pond, your work never ceases to amaze me.

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#11

Disagree?

Bill Tindall

What are you disagreeing about? I posed a question about the future looks of wood knobs , looking to see if anyone had experience, and stating that I didn't. I haven't seen wood knobs on any old furniture that I can recall. To elaborate, I have in mind a chest of drawers to build that could accommodate a shaped wooden knob, or not. A knob in such an environment would get daily use and I am wondering how it and the area around the knob would hold up. If I was building a wall cabinet that might get opened once a year I would not be asking the question.

It could have been clear from the question that I will consider durability in making this design decision. While your and other's opinions of considering durability in design choices may be of general interest they don't address the question posed for this design.

I was hoping someone might read what I asked and provide some experience such as " I have a 20 year old piece with shellaced knobs and it is doing fine", or "I have a 21 year old piece with varnished knobs and the varnish has all worn off", or whatever........

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#12

Ellis Walentine

To be fair...

Ellis Walentine

I think Gary was saying that plenty of old furniture had non-metallic "hardware" and history has vindicated its use, also that metal hardware is just as susceptible to soiling, oxidation and other ravages of time. From direct experience, I made cocobolo knobs for my kitchen cabinets about 25 years ago and, if anything, they are much more handsome now, with the patina of constant use. Like the shiny noses on bronze statues, polished by years of rubbing by viewers, knobs and pulls take on their own wear patterns and personalities, which contribute to the overall character of the piece. I would only suggest that you use darker wood when possible, as lighter wood, even with a sturdy finish like polyurethane, might discolor in a way that you won't be happy with. Also, if a certain amount of accumulated grunge bothers you, you can always clean it off quickly with a solvent-soaked rag and rejuvenate it with a wipe of varnish or shellac or wax.

Ellis

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#13

Now that was helpful

Bill Tindall

I would propose to use Blackwood(or is it Black Wood?) for a knob and it sounds like not finishing it would be the preferred approach?

As judged by the stuff I got to refinish/repair when I briefly did this sort of thing one can count on the ignorance and ineptness of many furniture owners and the problem likely will only get worse. Nor, is it prudent to imagine owners as tidy as Shakers. Hence, I consider the durability of the design and finish just like I consider the durability of joinery, all in the context of where and how the piece will be used.

For damn sure ball and claw legs with partially detached claws, as was the fashion in places, would not have lasted on a kitchen dining table, and they were not used in this application (or if they were that piece got junked in 1823). However, in the parlor, safe from children at play, they seem to last on a highboy and were used there to embellish the piece and establish the skills of the carver........to attach an example to my line of reasoning.

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#14

Re: Now that was helpful

Hikmet C. Sakman Victoria, BC CDN

Many rosewoods, which African blackwood and cocobolo are actually rosewoods, ebony and some other very dense woods do hardly need a finish. A little wipe of oil if anything and you'll watch them get prettier and prettier as the time passes.

In this cabinet, since it is maple against very dark wenge, it will be a looooong time until maple loses its contrast from accumulated dirt and grime by the use of decades and then, hopefully some merciful cabinetmaker of the future will replace them by simply drilling out the fox-wedged knobs, thinking the rest of it stood up the time so well. (Hopefully and it'd last with tight fitting huge cross-pinned mortises and other well-executed joints.)

Chico...

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#15

Dead on George...!

Hikmet C. Sakman Victoria, BC CDN

Of course, the years of experience is talking...!!! ;-)

Knobs are 5/8" in large diameter, tapers down to 3/8" over approx. 3/4" length.

Thanks George...

Chico...

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#16

Re: Wenge Entertainment Console with Quilted Maple

Hikmet C. Sakman Victoria, BC CDN

It is local, but thanks to the big guitar companies, it is harder to find "creme de la creme" quilted maple here, at the source of figured maple, in Vancouver Island.

Thank you.

Chico...

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#17

Re: Wenge Entertainment Console with Quilted Maple

Hikmet C. Sakman Victoria, BC CDN

I did contemplated about the lower side rail to line it up with the doors' lower rail, but it simply looked too much. Lower side stretchers looked way too heavy and unbalanced. (I even cut a thin pice and placed it on top of the side panel (bottom of it where it lines up with the top of the lower door rails) I also made many cabinets that side panels are bigger than the door panels at front. In the picture, this "unbalance" looks strong and trying to get into your eye, but in person and when you viewing it standing or sitting, it is a different story. I did the contemplating when it was sitting on my bench, once i put it on the floor, where it should be viewed normally, it looks better this way.

Knobs were intentionally made in round to break-up that monotoneous linear look as you noticed. (Double tapered legs were also intented for the same purpose.) Also, the maple bead-inlay in the center upper shelf line-up with the knobs, creating that "dot-line-dot" look in contrast to complement the round knobs. On the other hand, taper of the knobs connects with the taper of the legs.

Lastly, the ends of the top are also radiused to break up that linear look.

So, these aspects of the design were indeed considered and thought-out.

Thanks,

Chico...

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#19

I need a dictionary.....

Bill Tindall

"fox-wedged knobs"? Sounds like if I am to consider wood knobs I need to know this means of attachment.

The original question was not a comment on your use of wood knobs on this specific piece. Rather, I was looking for some guidance/experience on usage on a piece whose knobs would get used more, maybe daily, likely by a child or young adult. I have no personal experience with wood knobs except on dainty cabinetry where the knob would seldom be used.

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#20

Re: I need a dictionary.....

Hikmet C. Sakman Victoria, BC CDN

Fox-wedged: the post of the knob is drilled in the middle of the section buried in the hole, then you handsaw the end of the post to that cross-drilled hole, then slightly enlarge the hole with a tapered bit from the back side (inside of the door) then glue and drive in a wedge to the sawn kerf (I actually make two saw cuts to match the shape of the wedge.) Note: That hole should be inline with the grain direction.

Once the wedge is driven, end of the dowel expands and fills the area enlarged with a tapered bit and locked in for good. Fine round file will do the same job as the taperd bit, but requires more finesse.

Thanks,

Chico...

PS:I understood your question well, I was just making up a general scenario, using the knobs of this cabinet as an example. Hardware/knobs etc, should be part of the initial design, otherwise they usually scream that they are afterthoughts.

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#21

Ellis Walentine

Ah but...

Ellis Walentine

... fox-wedged tenons are blind.

Ellis

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#22

Re: Disagree?

Barry Irby

One of the things to give consideration to is the fact that ancient and antique furniture has been culled over time. The poorly made crappy stuff got culled out and thrown away because it was poorly built and was not worth the effort it would have taken to have it survive. The poorly designed and ugly stuff got culled out because it was not attractive enough to warrant keeping it and a giving it the the TLC required to allow it to survive. So we look at antique furniture and assume that all the furniture made in that age must have been well constructed and attractive to the eye. Not so. The other stuff was there in abundance, but got thrown out and worn out in nearly equal numbers. More affluent people were able to afford better furniture and were able to give it better care a and lighter use and it survived. The utility pieces of the masses wore out and were dispatched. A ball and claw foot would not have survived in a share cropper's house even if it had been there.

Mr. Sakman's stuff appears to be beautiful, well designed, nicely executed, technically well done and I suspect is highly prized by those with the where with all and vision to acquire it and it is very likely to survive for generations.

Bill, I think well executed wooden hardware has as good chance of surviving and thriving as metal hardware. (many "antiques" have been ruined by inept people polishing the "brasses". Saw one just the other day on Antiques Roadshow and they claimed it cut the value of the piece in half.)

Re: Wenge Entertainment Console with Quilted Maple *LINK*

#23

Re: Wenge Entertainment Console with Quilted Maple

Dick Coers

Well said and I too go over details this way. You certainly have the advantage of seeing it, as photos are a poor way to view fine design. Congrats on a nice piece.