Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Dust Deputy questions

Posts

Dust Deputy questions

#1

Dust Deputy questions

Carol Reed, Strawberry, AZ

I have one. It doesn't work well for me. It undoubtedly has something to do with my container. I do not have the 5 gallon pail with the lid. I have a trash can and I tried to fashion a lid. I am missing some critical criteria here. Does the lid need to be air tight? Does the Dust Deputy need to be mounted in the center of the lid? Any other tips? Thanks for your help.

Re: Dust Deputy questions

#2

Jim DeLaney, Austintown, Ohio

Re: Dust Deputy questions

Jim DeLaney, Austintown, Ohio

Yeah, the lid needs to be airtight. Any leak will negate the cyclone effect, and the dirt will go to the vac instead of the can. Put some closed cell foam weatherstripping between the can and lid and you oughtta be okay.

Re: Dust Deputy questions

#3

Re: Dust Deputy questions

Stephen Kirk

What size trash can are you using? I think it it tops out on 5-10 gal buckets. Bigger and a shop vac may not be able to build enough pressure and flow.

Re: Dust Deputy questions

#4

Re: Dust Deputy questions

Carol Reed, Strawberry, AZ

That's an interesting thought. I was using the regular 33 gallon can. Hmmmm....

Re: Dust Deputy questions

#5

Re: Dust Deputy questions

Alan in Little Washington (NC)

The size of the trash bin has no effect on suction, flow, or cyclonic separation . . . . . unless it is full to the point of overflowing.

However, it MUST BE ABSOLUTELY AIR TIGHT as do the connections between it and the bottom of the cyclone.

Re: Dust Deputy questions

#6

Re: Dust Deputy questions

Stephen Kirk

I had a trash can pre-separator on my main dc, but those aluminum ones are hard to seal. I took it off because I lost too much pressure.

Re: Dust Deputy questions

#7

Re: Dust Deputy questions

Carol Reed, Strawberry, AZ

Know what you mean, Stephen.

I wanted a larger container than a 5 gallon bucket. That would never work with a planer, for example. I'd have to empty it more times, with more time and effort, that letting everything fly and clean up later! I have searched for just lids with the ring binder with no joy. I have an old Rigid DC and it has a 30 gallon fiber container and the DC incorporated into the lid held on by a ring binder. I'm going to try to make another flat lid for the Dust Deputy which also is locked on by the ringer binder. A seal of closed cell tape should make it airtight. We'll see.

Thanks, folks. Now I know what my problem was.

Re: Dust Deputy questions

#8

Re: Dust Deputy questions *LINK*

del schisler

this what i have and it work's great.


http://www.google.com/#q=dust+collector+lid+for+trash+can&hl=en&prmd=ivns&source=univ&tbm=shop&tbo=u&sa=X&ei=8OwVTqzlK8Tx0gHFq_Bi&sqi=2&ved=0CIkBEK0E&bav=on.2,or.r_gc.r_pw.&fp=5261159ea8a95ccb&biw=991&bih=604

Re: Dust Deputy questions

#9

Vacuum is not pressure.

John in NM

There should be vacuum throughout the system, if there are no leaks the size of the vessel will only effect how long the system takes to reach the vacuum of which it is capable, governed by the rated cfm of the vacuum source. Seal the bucket and the cyclone should work as expected.

I've seen cyclone systems used open at the bottom, but only on positive pressure systems (rock drills with 350 cfm or bigger compressors). They are not as effective as a vacuum cyclone IMHO, but the applications are so vastly different that this is little more than a gut feeling.

Re: Dust Deputy questions

#10

Re: Dust Deputy questions

John Lucas

I'm in the same boat. I have sealed the trash can lid and all other joints but I loose so much air volume that the hose doesn't seem to pull nearly as much stuff as it did when the separator wasn't there. I'm seriously thinking about pulling it out. I do enjoy emptying the trash can better than the trash bags on the dust collector.

Re: Dust Deputy questions

#11

Re: Dust Deputy questions

Barry Irby

I have one I made out of a 30 gal roll around rubbermaid trash can. On of those squarish ones. I put two four inch fittings on the lid and gave it a shot. The can collapsed. I cut sticks that I scribed into the corners and screwed them in and tried again. Thought I was going to have to seal the lid. Nope. Works okay. I don't use much because my shop is so small it gets in the way, but when I do a lot of turning I use it because its easier to empty than the bags and it stops the long stringy shavings from going through the impeller and getting hung on the blades.