Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Magnetic featherboards - preferred types/brands?

Posts

Magnetic featherboards - preferred types/brands?

#1

JL

Magnetic featherboards - preferred types/brands?

JL

I'm jointing the edge of the oak that I purchased.

At 12" x 13/16", that's a lot of surface to keep straight.

Obviously, a magnetic (or other) featherboard would be good to use. I have a number of featherboards that I use for my table saw and my router table. They fit in the miter slots.

Any preferences as to brand or type that would work with my jointer (or table saw for that matter).

TIA.

Re: Magnetic featherboards - preferred types/brands?

#2

For Jointing

Mark Mandell - Gone Round In Jersey

I use a shop-made supplemental 8" high fence that clamps to the machine fence; controls a 12" board easily with featherboards. "Costs" me about 1" in jointing capacity on my 6" machine, but I've never needed to joint a plank thicker that 4" anyway. If I really needed more control of the joint-face, I'd clamp a trap-fence board to the in-feed table rather than a feather.

Re: Magnetic featherboards - preferred types/brands?

#3

Re: Magnetic featherboards - preferred types/brand

paul in AZ

I have and use two. One is a yellow Magswitch and the other an orange Ridgid.

The fingers on the orange one are a hair stiffer and a tiny bit better at their function. Both magnets adhere well. Both are actually OK as featherboards. HD's Ridgid was cheaper.

I use them primarily on the bandsaw for resawing. With two faces jointed square the pressure at the bottom of the board helps keep the board vertical to give a uniform thickness slice. I have tried it with a shaper but am too new to that to have much of opinion on the value. I've never tried them on the jointer.

Re: Magnetic featherboards - preferred types/brands?

#4

Re: Magnetic featherboards - preferred types/brand

AZ in Colorado Springs

I recently got the Rigid magnetic featherboard. I use it on the TS and its great!

Re: Magnetic featherboards - preferred types/brands?

#5

Re: Magnetic featherboards - preferred types/brand

Dave's Not Here

I have a Magswitch Universal and like it a lot. I've also checked out the RIDGID one at HD and could find nothing wrong with that. Either one would be a worthwhile purchase.

Re: Magnetic featherboards - preferred types/brands?

#6

Re: Magnetic featherboards - preferred types/brand *LINK*

Lee Schierer McKean, PA

I really like my Grip-Tite magnetic feather boards. They are very versitile and hold really well. Mine came with a side roller that works very well to hold stock on the out feed side of the blade against the fence when ripping. I also have a steel plate for my aux fence to mount them sideways for ripping. They conveniently stick to the legs of my saw so they are always handy.

Lee


img

Grip-Tite

Re: Magnetic featherboards - preferred types/brands?

#7

JL

I'll go with the Ridgid - I can pick it up today

JL