Krenov style saw horses....
Bill Tindall

I must have some Missouri blood because I often need to be shown something before its utility becomes apparent. To that end I was in David Finck's (the plane person) shop and didn't stumble on some Krenov style saw horses, unlike mine whose legs splay out. Their utility instantly became apparent- light weight, strong, easily moved and stacked.
I buy a few hundred bdft of #2 common oak and poplar from time to time for needs such as this and had on hand a white oak board 12' x 6" which just made 2 horses 30" high, 22" leg and 20" wide. It was even spalted, a defect everywhere except modern furniture, which was why this otherwise nearly clear piece was graded as pallet lumber.
I made the horses as those of Finck's- through tenon for the middle stretcher,and bridle joint screwed for the top stretcher. However, I made them too robust. The pieces are 3" wide and 2 1/2" would be more ideal for all but the foot. They will be employed at once on a diminutive cherry chest of drawers I have under way for a small grand daughter.



