Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Veneering three large panels.

Posts

Veneering three large panels.

#1

Veneering three large panels.

Marc in Mass.

Hi to old friends and potential new ones. Been a while since I posted here. Life is good now. I have a project that I took on and need some help locating just the right guy to advance a portion of it. I need to find a veneer guy in New England, hopefully near Boston, to lay down some bookmatched walnut sheets (not cloth backed) on some high end plywood. 7'X4'. The craftsman should be well versed in this kind of application. He or she need not be a pro, a gifted amateur would be good. I don't know any at all here and WC being the repository of all thing wood I thought I would start my search here. My plan is to laminate two sheets of 1/2" ply together, put some cheaper veneer on one side and the good stuff on the other. Probably band the ply first but that is knowledge I don't have yet. Any help locating a good veneer person would be much appreciated. Marc in Mass. (Hi Ellis)

Re: Veneering three large panels.

#2

Re: Veneering three large panels.

Bill Tindall

The center of the veneer universe is in the Louisville, KY area. I have not had such a panel made but a friend has. There are shops there that do this sort of thing. And they will then ship the product. Does the veneer need to be something you provide?

Re: Veneering three large panels.

#3

Ellis Walentine

Hi Marc

Ellis Walentine

Glad to hear things are going well for you. You've been among the missing for a long time.

Anyhow, There are a bunch of ways to tackle this job. One is to call someone like Darryl Keil of Vacuum Pressing Systems and ask him if he has someone to recommend. Another is to just call an architectural panel company (usually commercial plywood suppliers can recommend someone) and buy the finished panel outright. They will lay it up to your specs, and if your veneer must be used, they may be able to accommodate that too. Another is to call one of our Woodfinder suppliers in your area, such as Berkshire Veneer and see if they can steer you to someone. Or, ask around and network yourself to a small shop that has a hot press and get them to do it for you.

If you're going to have someone do the layup, don't even think of preparing the substrate yourself -- let them do it.

Let us know how it works out, and don't be a stranger, eh?

Ellis