Got my spray gun working again.
Barry Irby
I left it sitting on the shelf in my shop since I moved from my previous house thirty years ago. I thought it was clean when I put it away, but low and behold it was pretty cruddy. Tried to clean it with lacquer thinner, but no go. Tried brush clean which I had, but no go. Got some stripper on the suggestion of a friend and that helped. Some elbow grease and a piece of steel wool on a stick finally got the cup clean. Then I stripped the gun down to the frame and cleaned every thing I could find. Put it back together and it works. Had some Deft lacquer in a can sitting on the shelf. Thinned it about 25% and sprayed the inside of the cabinets.
Headed out to get some more finish. I am pretty happy to get this ancient Sears gun working again. Can't believe I put it away with a quarter cup of crap in it and can't believe its working again.



