Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

"Scrap" up-date . . .

Posts

"Scrap" up-date . . .

#1

"Scrap" up-date . . .

steve mackay

I'll admit, I picked up a WHOLE board to get the top out of one peice. But the rest is still all scraps. And, by golly, the darn thing is STILL square ! :\ Still no nails, screws or hardware. I'm second guessing the molding around the bottom and under the top though. For those narrow bands would something darker like walnut have looked silly do you think ?


Re: "Scrap" up-date . . .

#2

Re: "Scrap" up-date . . .

Thomas Skaggs, Foothills of Mount Level

Using up scraps like that certainly leaves a good feeling. Well done. I say leave the mouldings.

T.

Re: "Scrap" up-date . . .

#3

Clint Searl

Re: "Scrap" up-date . . .

Clint Searl

Very nice looking. How did you attach the runners to account for cross grain movement?

Clint

Re: "Scrap" up-date . . .

#4

Re: "Scrap" up-date . . .

steve mackay

Since the up-rights (?) are made up of pieces I ran all the daddos 1/4 deep then just added "caps" on the sides to "stop" them. The runners are 1/2. That gives me 1/4 tieing all the pieces of the side together and 1/4 that the drawers run on. I guess its almost a spline joint across the panel.


Re: "Scrap" up-date . . .

#5

Re: "Scrap" up-date . . .

Barry Irby

If you glued those in for heir full length, you have a Looong cross grain situation and you be in trouble. the panels will expand and contract with changes in moisture content, but the slides won't. I'd be surprised if they hold up.