Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

"Adapting" other tools/things for woodworking,,,,

Posts

"Adapting" other tools/things for woodworking,,,,

#1

JL

"Adapting" other tools/things for woodworking,,,,

JL

I'll start.

I do a lot of loose tenons. One of my most useful tools in fitting is a pair of sheet metal vise grips. Just the thing to get out those really snug loose tenons.

Yogurt cups - just the thing to hold a good squirt of glue - as there seems to be a never-ending supply - if they get too bad - toss them.

Dish detergent bottles - why bother with an expensive glue bottle? The "snap cap" small bottles work quite well.

Foam sponges - just the thing to cushion sandpaper. (Personally, they work better in woodworking than in the kitchen.)

Small crock pot - hide glue or warm finish - just the thing to heat the water for either (also $2-3 at a yard sale or thrift shop).

Re: "Adapting" other tools/things for woodworking,,,,

#2

Goo Bottles Plus

Mark Mandell - Gone Round In Jersey

I have several Goulden's bottles for PVA. Do well; actually better than the Franklin caps, easier to clean, and they're free.

Need shop cabinets? Hook up with a kitchen reno in your area and help them do the demos so you get the old case work with draw's and doors!

Old furnace blowers make very good shop air cleaners; a couple of filters, a switch, and one of those appliance cords with molded plug you cut off the old frig and you're good to go. Also do well for a down-draft sanding bench.

Re: "Adapting" other tools/things for woodworking,,,,

#3

Re: "Adapting" other tools/things for woodworking,

Dale Penkala

Glass jars- I like them for mixing up shellac & analine dyes. Specifically baby food jars. There are a couple different sizes and there great for small amounts of different colors of dye or different spec's of shellac.

Dale

Mid-Michigan

Re: "Adapting" other tools/things for woodworking,,,,

#4

paper towel holder, digital mic.

Bill Tindall

Wife gave me one to put in the shop. I stock it with the "1/2 sheet" size.

Digital micrometer- measure fastener diameters for pilot holes, thickness of sll sorts of things. Amazingly handy.

Re: "Adapting" other tools/things for woodworking,,,,

#5

Steve Strickland

Dog toenail clippers

Steve Strickland

I cut 1/8" dowel pins with dog toenail clippers.

Re: "Adapting" other tools/things for woodworking,,,,

#6

Re: Dog toenail clippers

Jesse Cloud

Electric carving knives are great for cutting foam rubber for upholstery.

Every now and then when SWMBO is not looking, I will 'borrow' here iron or hair dryer for veneering.

Ketchup squeeze bottles for fast application of glue. I have 'glue up parties' when I am doing large laminations with many plys, everyone gets their own squeeze bottle.

Automotive feeler gauges have lots of uses around the shop.

Bamboo skewers for bbq make good hole fillers.

Starbucks coffee stirrers are the bees knees for small amounts of finish.

Re: "Adapting" other tools/things for woodworking,,,,

#7

Screw jacks

Neal in San Jose

Very useful for installing heavy cabinets like upper cabinets in kitchens. Will hold a ton - actually, I think mine are rated at 2500 lbs. - capable of very accurate movements, they never get tired like an assistant, and they are cheap. I think I paid something like a dollar apiece for two at an auto junk yard. I also sometimes use a standard tap to put threads in hardwood or plywood for limited use jigs and fixtures. I use a tap drill a little smaller than what's recommended for metal for deeper thread depth. The advantage is that if I decide later I want to make the jig longer lasting, I simply drill out a little larger and install a heli-coil or tee nut (varies depending on the mood I'm in).

Re: "Adapting" other tools/things for woodworking,,,,

#8

Drinking straws, coffee stirrers, shot glasses...

Grant in Iowa

I use both types of straws to clean glue squeezeout from inside corners during assembly. You press the straw such that it conforms to the angle of the straw then push it along so it shovels up the excess glue. when the end of the straw is full, just clip it off into the trash with a pair of scissors. smaller straws such as coffee stirrers for small jobs, and big drink sized straws for larger messes. Cheap at the store or free at fast food joints.

I have a pack of disposable shot glasses and other cups of various sizes I keep around the shop. Just the thing for mixing glue, epoxy, or when i need a place to put some glue for a brush on application. Cheap at the grocery store.

I keep an old 1/2 gallon milk jug filled with water on the bench for use whenever I need some water for cleanup or to mix something water based. Free.

Huge set of crayons. Useful for filling nail holes in stained projects.

I keep an electric pencil sharpener in the shop next to a bunch of pencils, never have a dull pencil now.

My friend who does lots of biscuit joining keeps a toaster oven in his shop to bake the biscuits so they'll dry out and be easier to install in humid weather.

Syringes with giant needles. bought at the farm supply store, useful for filling holes with glue when regluing chairs. Also useful when mounting hardware to water skis...I fill every hole with epoxy just before driving in the screw to prevent the shop made wooden skis from rotting at the screw holes.

Probably many more, but I am drawing a blank at this point.

Regards,

Grant in Iowa

Re: "Adapting" other tools/things for woodworking,,,,

#9

Re: "Adapting" other tools/things for woodworking,

Gary Smyth

This is a really interesting question for me. I use a lot of devices not considered �woodworking� tools. Tools commonly used in graphic art, sewing, printing, medical, engineering, theater/TV are accurate and (used) generally less expensive than the �woodworking� tools doing similar jobs presented by the various catalogs. Looking around, here are a few.

Exacto knife w # 11 blades

Machinists triangles, calipers, trammels, proportional dividers

Drafting erasers, protractors, straight edge, t square

Artist acrylics, oils, markers, and pigments for color matching

Artist and photo retouch brushes

Specialized art publications for color formulas

Metal working depth, wobble, and wire gauges

Olfa circular (wheel) fabric cutting tool and large self healing sewing cutting board

Surgical tubing for odd size clamping

Fine metalworking scriber with thinnest point

3M light duty removable double sided poster tape

Baseball catcher�s chest protector (I survived one massive kickback)

Nautical bronze connectors, chain, handles.

Dental tools, picks, and tweezers

Printer�s regular and center rules, 15X magnifying lens

Very light sewing machine oil

Clay sculpting scrapers to remove glue squeeze out

Aileens tacky glue for fabric, gaffer�s tape

Wallpaper hangar steel edge six foot rule

Toothpicks and skewers for filling screw holes

Medical stainless forceps

Climber�s LED headlight

Metal detector wand

About 100 pounds of "rectangular" gym freeweights

Re: "Adapting" other tools/things for woodworking,,,,

#10

Hemostats are great clamps!!!

Jesse Cloud

Re: "Adapting" other tools/things for woodworking,,,,

#11

Re: "Adapting" other tools/things for woodworking,

Ron in Sterling, CT

There is no running water in my basement shop, so I keep a liquid laundry detergent jug (the kind with a plastic faucet) filled with water. It comes in handy for many uses.

Ron

Re: "Adapting" other tools/things for woodworking,,,,

#12

Jim DeLaney, Austintown, Ohio

Re: "Adapting" other tools/things for woodworking,

Jim DeLaney, Austintown, Ohio

Concur. I have every one of those items, except for the catcher's chest protector. Might look into one of those, too... 8)

Re: "Adapting" other tools/things for woodworking,,,,

#13

Re: "Adapting" other tools/things for woodworking,

Dave Bair, Eaton Rapids, MI

Disposable pill cups to hold small amounts of glue for glue-ups.

Cabela's "worm blower" for injecting glue into tight areas.

IBM typewriter cleaning brushes for spreading glue and cleaning up squeeze-out in corners.

Hockey puck for tapping joints into place when they fit well enough to not require the rubber mallet. Ditto for disassembly of a dry fit-up.

12" pizza pan for cleaning saw blades; it's just deep enough to immerse the blade without using a lot of cleaner.

Re: "Adapting" other tools/things for woodworking,,,,

#14

Dale Lenz

Pop cans

Dale Lenz

After drinking a soda, Coke, I rinse out the can and smash vertically. The bottom of the can makes great 5 minute epoxy mixing container. Recycle and get more $, :").

Re: "Adapting" other tools/things for woodworking,,,,

#15

Re: "Adapting" other tools/things for woodworking, *LINK*

Dave Paine

Lots of useful replies. I will have to use some of these.

I recently saw a video of someone who reground a twist drill to make a hollowing tool for the lathe. I have to try this. Most of us have several sets of twist drills. The old story of easier to buy new set than replace the one which is dull or broken.

The link is the home page of the person who created the video. No relationship, just passing on.


http://www.woodennicol.com/tools.html#ht

Re: "Adapting" other tools/things for woodworking,,,,

#16

Re: "Adapting" other tools/things for woodworking,

Galen Vetterick

Dave

I use small drill bits as the cutter for hollowing ornaments. I had a small boring bar left from a metal lathe and used it for the tool shaft since it already had a hole for the cutter (bit) and set screw to hold.

I also had old 1/4" shank router bits with straght flute and one with round nose that I modified the grind a little and they fit in my larger home made hollowing bar.

I have not yet tried a similar carbide router bit but see no reason it would not work as well.

Re: "Adapting" other tools/things for woodworking,,,,

#17

Re: "Adapting" other tools/things for woodworking,

charlie belden

Liquid laundry detergent bottle with a screw cap for filling, a push button spouse for dispensing - Anchor Seal.

Sturdy flat toothpicks caterers and chinese restaraunts have - for getting a bit of glue in tight spaces - or for mixing epoxy.

Circle fabric cutter for LONG scribing both sides of a cut on ply to minimize splintering

Spring clothes pins for small clamp ups.

Re: "Adapting" other tools/things for woodworking,,,,

#18

Jesper, Denmark

Re: "Adapting" other tools/things for woodworking,

Jesper, Denmark

Tongue depressors for mixing epoxy, shap�ng round concave fillets.

Dixie cups for mixing small amounts of epoxy.

Re: "Adapting" other tools/things for woodworking,,,,

#19

Re: "Adapting" other tools/things for woodworking,

Philip Duffy

Chop sticks; stir liquids, use for small dowel pins, and a hundred other applications. I set 2 in place on the inside of a gun stock yesterday to act as shock absorbers for recoil. Carefully placed they can reinforce old gunstocks. Work like a charm. Phil

Re: "Adapting" other tools/things for woodworking,,,,

#20

Re: "Adapting" other tools/things for woodworking,

Stuart Johnson

Jacks, the ones kids use with a little rubber ball, for painters points.