Back for the French Footed Chest
Bill Tindall
An exercise in excessive frugality
Normally I would just ship lap boards for the back of a chest. The back is rabbited 1/2" to accept the boards. However.....
The last quartered poplar I had sawed for drawer stock was sawed a heavy 4/4 instead of the 6/4 requested. So, when I resaw this lumber for a 1/2" drawer side I am left with something about 1/4 to 3/8" thick. Well this thing has lots of drawers and there was lots of this thin stuff remaining. So I thought, in a burst of exceptional frugality, that I would make the back "frame and panel" and use this thin stuff for the panels. And, I had some 1/2" pieces left from the drawer making that was sufficient for the frame. The frame pieces are the size they are because that was the size of the 1/2" drawer remains. And I think a frame and panel back looks nice and I always wanted to try one. This chest is taking for ever to build so what's a bit more time. Took all day to make and fit all the parts and another part day to shellac it front and back. (I shellac all the interior parts in a chest of drawers. It leaves the poplar parts clean looking and they stay that way. ) I spent the rest of the day finding lumber for the top. No matter how much lumber one has there are never pieces perfect for the need.



