Possible OT - Shelving in the Parish hall attic?
JL
Our new Parish hall is a Morton building. Wisely, the designers made the majority of the attic not easily accessible (nothing accumulates stuff more than a church).
At the end of the Parish hall, we have closets extending across the width of the building. There is access to the area above these closets via folding stairs.
Anyway - the studs on the building are run horizontally rather than vertically. It would be nice to have shelving in this area so we don't get piles of junk. I don't want to have to go into production mode and make lots of shelving if I have other alternatives.
The wall spacing is about 7' high or so by 8' deep x 50' long. I was thinking Closet Maid. I'm willing to listen to other suggestions including building/making shelves. I figure it would cost $1300 for four shelves running across the full length for Closet Maid (16" deep). Decent plywood (3/4" "cabinet" plywood) is running about $30 around here. So it would run $180 or so for the plywood, $60 for the paint and whatever else was needed for plywood shelving (say $400 for 2 x 4s). It would take me (and a couple of helpers) a week or so. I could have the Closet Maid done in one day.
So - what is a reasonable, inexpensive design that would work in this place? I can make shelf bases with 2 x 4s (or 2 x 2s) and have plywood on top of them. I can lag the shelves into uprights (with or without notches). I can screw each 8' section into the next section.
Should I go with Closet Maid (or equivalent) or build?




