Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Anyone sold Scrap steel? (OT)

Posts

Anyone sold Scrap steel? (OT)

#1

Anyone sold Scrap steel? (OT)

Barry Irby

I bought a house that is full of junk, including he old appliances. the young man living across the street wanted the clothes washer. We told him it was broken beyond repair. He laughed and said he was going to take it to a metal recycler. I gave it to him to get rid of it. Now I am wondering if it would be worth taking the rest of the stuff there myself. What would a range sell for? any idea what this stuff goes for?

Re: Anyone sold Scrap steel? (OT)

#2

I'll know tomorrow

Bill Tindall

I am hauling a load to sell tomorrow. The price varies depending on it density and purity, ie. a chunk of steel will bring more than sheet metal, which in turn will bring more than a washer.

Re: Anyone sold Scrap steel? (OT)

#3

$0.05/lb in Montreal

Mark Nowicki

Re: Anyone sold Scrap steel? (OT)

#4

Re: Anyone sold Scrap steel? (OT)

John Lucas

I Just gave a couple of appliances to the guy who did the floor on the house I'm redoing. He said he hauls stuff like this to the metal recycler all the time and makes extra money. I was glad to not have to haul it off myself.

Re: Anyone sold Scrap steel? (OT)

#5

Re: Anyone sold Scrap steel? (OT)

Gary Camp, Bend Oregon

How bored are you? Around here, the difference between Prepared and un-prepared is significant. Prepared = Seperated by type and grade of metal and "cleaned" (no insulation, no mixed metal parts etc.) and not longer than 36" and able to fit through an 18" hole. A couple of years ago I spent part of the winter cleaning up part of my property. It was to cold in the shop to really do any woodworking, so I stripped insulation of wire, took faucets apart and generally cleaned up stuff. I ended up taking 225 lbs of brass, copper and aluminum to the metal recycler, and got a check for 218 dollars. Was it worth the time I spent, probablly not a very good hourly wage, but I'd have just been surfing the internet otherwise, the yard was cleaner and it just plain felt good. Check with your local recycler and see what they pay and how they want scrap prepared

glc

Re: Anyone sold Scrap steel? (OT)

#6

Moses Yoder

Re: About $200 per ton here

Moses Yoder

Re: Anyone sold Scrap steel? (OT)

#7

10.5 Cents Per Pound in NC 

Jim Smith

Re: Anyone sold Scrap steel? (OT)

#8

Re: Anyone sold Scrap steel? (OT)

Barry Irby

I called a local scrap yard and they said $8 a hundred pounds. The range probably weighed over a hundred pounds and less than two hundred. I gave it and the other appliances to the guy across the street. Better to have a friend in the neighborhood than a few bucks. Plus, yesterday afternoon he had four tandem dump truck loads of dirt delivered at $50 each and when we got back this morning he had had them spread. I could use some soil at my place and the guy hooked me up with a load of dirt and a guy to spread it for a total of $150. Seems like a "hella" deal to me.

Re: Anyone sold Scrap steel? (OT)

#9

That does it, I am moving.

Mark Nowicki

Re: Anyone sold Scrap steel? (OT)

#10

no problem.....

Bill Tindall

just hook on another trailer for the iron when you come south to Florida. Tomatoes can be hauled back in the spring. (I suppose it is ok to make Canadian Florida jokes if you just missed being Canadian by a few miles (born Niagara Falls)

Re: Anyone sold Scrap steel? (OT)

#11

Current prices- Kingsport, TN

Bill Tindall

cents per pound

Mixed steel- 10.5

brass- 140

copper - 278

aluminum- 48

I collected $110 for a very small load of mixed metals this morning.

Re: Anyone sold Scrap steel? (OT)

#12

14.5 cents/lb, Anniston, Ala.

Henry Higginbotham

. . . for the 1120 pounds of steel (mostly galvanized angle) a buddy and I hauled to the scrap yard about an hour ago. Sixty-five cents for aluminum cans; 70 cents for disassembled storm window extrusions.

More tomorrow. :)