We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
Just finished this free standing closet to go in a clients office. The interior has a coat rack, hooks and an umbrella holder. The piece is made from sapele both veneers and solid. The inlay is mother of pearl, abalone, white oak and walnut bur.
I grew up in an old house without closets and we used free standing closets. I still have two of those free standing closets which are now used for storage/nostalgia. Perhaps I have a special appreciation for your work here. Love it.
I like it. I am curious why you didn't use the little cross bar on the side panels? Oh and while you were at that, why not throw in s little inlay or marquetry there? $$
I would like to hear about working with the mother of pearl. Back in the seventies, I picked up some shells from LaJolla beach, when I was doing a job out there. I tried fooling with it a little, but with the limited tools back then, and the smell, I never did much with it. Do you have a source for flat, even thickness, already polished pieces?
Lots of houses were built without built-in closets at the turn of the 20th century (early 1900s) and lots of such free-standing cabinetry was used instead, but rarely would they be as attractive as this wonderful example.
I really like the feeling that this piece creates, with the curly texture of the sapele veneer and the swirls of the rails and stiles adorning the simple form of the cabinet and creating a uniform and non-competitive background for your marquetry work. Balancing all these dimensions is the challenge of the finest work, and I'd say you've struck an excellent balance here.
I usually don't copy exactly what is happening on the front of the piece on the side, it might mimic some details but I think it adds visual interest to the piece and makes your eye wander.
I buy my shell already flattened, there are a bunch of sources mostly for the musical instrument trade trade I user www.rescuepearl.com she ships fast and her prices are good.
Craig Thibodeau has written an article for finewoodworking about working with shell recently. One of the best books on the subject is by Larry Robinson "The Art Of Inlay" he also has videos on the subject. When I first had a job requiring inlay I was lucky enough to know Larry and called him up for pointers, his work is pretty amazing.
The cool thing about working with shell is it that it really only takes a few tools most of which you probably have and if you don't they are fairly inexpensive, the shell on the other hand cost more but isn't that bad.
Mother of pearl is easier to cut and more forgiving than abalone but it really isn't much of a problem cutting it.