Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

OT chair cane problem

Posts

OT chair cane problem

#1

OT chair cane problem

james runchey

I just recaned two chairs with prewoven sheet cane. I'd been dreading this project for some time, with apparent good reason, as I had a problem. After all was said and done, one of the chairs has a broken cane right on the edge of the seat where it turns down into the spline. I put a drop of crazy glue under the cane, pinning it down OK, but it has a sharp edge that is going to catch on someones' clothes unless I can put something on the edge to smooth the transition between the cut edge and the spline. I think maybe a drop of something clear that would harden and bridge the gap, but I can't think of what.

Re: OT chair cane problem

#2

Perhaps

Lee Schierer McKean, PA

Clear fingernail polish

or

A drop of polyurethane varnish

or

a drop of epoxy

Lee

Re: OT chair cane problem

#3

Re: Perhaps

james runchey

Thanks, Lee. Those sound like good options.