Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

downsizing in Newark, NY (somewhat OT)

Posts

downsizing in Newark, NY (somewhat OT)

#1

downsizing in Newark, NY (somewhat OT)

Paul Blackwell

We have finally made the decision that taking care of our place has gotten to be more than we care to handle. We are going to build a new house, and the plan is to put a smaller version of my shop in the basement of the new place. I'll be selling my 3HP Jet twin canister dust collector with about 100' of 4" plastic pipe, blast gates and remote start, a 20" DeWalt scroll saw, Grizzly 8" jointer, Parks 12" thickness planer and probably more. How would you proceed? Auction, classified ads? If we went the auction route, there would be some other household stuff. Just sorting through all the wood collected over thirty years (some quite small as I build lots of toys) is overwhelming. I hate to leave my shop built twenty years ago, but such is life.

Re: downsizing in Newark, NY (somewhat OT)

#2

Moses Yoder

Re: downsizing in Newark, NY (somewhat OT)

Moses Yoder

Don't know how old you are, but putting the shop in the basement for old age is not idea. If you plan on spending the rest of your life there, everything should be handicap acess planned ahead of time (ideally everything at ground level). Your shop would be adeal in a little outbuilding in the back or if you have to you could plan for a stair lift or elevator to get to the basement. A lot of older people fall down the basement stairs and break their neck.

Re: downsizing in Newark, NY (somewhat OT)

#3

Re: downsizing in Newark, NY (somewhat OT)

Todd Nebel

Hi Paul,

I've had fantastic success selling woodworking tools and machines on craigslist. Other household items are a little harder to sell in my experience, but they eventually all sell. Now nothing I ever sold from my shop had a spec of rust or was misused or not running, so my experience has been it sells usually within a week, if not that day. Of course you need to have fair pricing as well. You may want to try to sell it here too or donate to a good cause.

Re: downsizing in Newark, NY (somewhat OT)

#4

Re: downsizing in Newark, NY (somewhat OT)

FredD

Every tool auction I have attended had tools in every state of abuse selling for nearly the price of new ones and in the case of some model 77 Skilsaws , went higher then you buy them new for. Clamps are invariably higher.

I agree with Moses, rethink the basement location.

FredD

Re: downsizing in Newark, NY (somewhat OT)

#5

Re: downsizing in Newark, NY (somewhat OT)

Thomas S Stockton

I would second the idea of craigslist and maybe have a garage sale for the household stuff. If some of the household stuff is big ticket I would do craigslist and maybe ebay if it is collectable.

Tom

Re: downsizing in Newark, NY (somewhat OT)

#6

Re: downsizing in Newark, NY (somewhat OT)

Bruce, a MN Galoot

I have a friend whose shop is in his basement, but he's primarily a turner. He has room for indoor storage, his lathe and a bandsaw. In the long MN winters, he gets a lot done. His tablesaw and other equipment are in the garage.

Another friend's parents are both craftspeople, his mom a ceramist and his dad a woodworker. Their home is a true split level. His dad's shop is the bottom level, with no windows. It is about 500 sq. ft., and it's fully equipped. He said the biggest consideration was dust collection and negative air pressure to keep all the dust from the rest of the home. His mom's level was the daylight windowed basement. She did all her ceramic work indoors, kiln and everything. My friend said that they noticed that the windows were getting difficult to clean and they assumed it was a film from the clay. It wasn't. Her father, a chemical engineer, analyzed the windows and determined that they weren't being coated, they were etched. It made them wonder what it was doing to their lungs.

Re: downsizing in Newark, NY (somewhat OT)

#7

Stairlift To The Shop

George Colonel's Workshop-Havertown PA

Good Afternoon Paul and Moses,

I generally agree with Moses concerning shop access and loss of physical capabilities. I was relatively strong and healthy when we moved into our present match box. The shop went into the basement, and wasn't much hassle. Ourside cellar steps are too restrictive for easy access, but livewithable. My wife saw an ad for a stair lift for $300 and bought it. My #3 son installed it and ran wiring. I think its the greatest thing since apple sauce. Since the shop is within the house structure, it is always heated/air conditioned.

George

Re: downsizing in Newark, NY (somewhat OT)

#8

Also Great For Laundry and Beer Cases

George@Colonel's Workshop-Havertown PA