Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Best way to raise a platform bed

Posts

Best way to raise a platform bed

#1

Best way to raise a platform bed

Adam

I'm looking for a sturdy way to take my daughters existing wood platform bed and raise it 2feet higher to get the dresser underneath? Specifically- is the sturdy way to attach "stilts to each leg to raise or do I need more?

Re: Best way to raise a platform bed

#2

Re: Best way to raise a platform bed

Mark Salomon

Wow, does this conjure up some images. Attaching stilts to a bed? Leg by leg? Hmmm, not sure that I understand that one. Also, balancing a bed on a dresser might make it a tad tippy. Not sure that I'd want to spend the night there. If you're still set on this you might want to see if David Copperfield can raise this properly (with your daughter on the bed smiling at the audience, of course). Sorry for the bit of humor. :)

Re: Best way to raise a platform bed

#3

Re: Best way to raise a platform bed

Steve Schoene

You still need a sturdy base, legs that work at 12" tall and solidly attached to a bed platform, don't fair so well when extended to 36", with an iffy joint between them and old legs. For that matter even making new, longer legs is still a bit suspect. The longer leg increases the leverage against the joint.

One idea is to make the new base in the form of a dresser with 4 or 6 drawers in a sturdy case that supports the bed frame.

When you raise the height you also need to add rails and some sort of ladder.

Re: Best way to raise a platform bed

#4

Spence

Re: Best way to raise a platform bed

Spence

When I was younger I raised my bed but went in the other direction. I suspended it from the ceiling with chain and lag bolted the inside rails to the studs. It worked great. At the time I weighed in at 200+ pounds. Another way would be to build a higher platform and use 6"x6" for the corner posts. You could do it like a post and beam structure. Hope this helps.

Spence