Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

The LOML has comissioned

Posts

The LOML has comissioned

#1

The LOML has comissioned

Rich Pearson in Mill Creek, WA

(allright...ordered) a small entryway table from the Skunk Works (my ultra secret condo basement workshop).

Design, construction details, etc are all finalized but the finished piece must be a deep espresso (almost ebonized) brown which still allows some grain to be visible.

I need help on the wood & stain combination to best get the desired result.

What would you use?

I would appreciate the benefit of the WC collective wisdom!

Thank you

Re: The LOML has comissioned

#2

Re: The LOML has comissioned

R. Payne

A couple coats of coffee?

Vinegar and steel wool on something with a high tannin content (walnut, oak etc).

Van Dyke crystals?

Black walnut husks soaked in liquid to make a stain?

Store bought stain or dye?

Starting with a dark wood like black walnut may make it easier to get there.

ron

Re: The LOML has comissioned

#3

Re: The LOML has comissioned

Steve Schoene

I would not bury walnut under all the pigment you will need to achieve such a color. I'd start with a strongly concentrated dye mixed from powdered water soluble aniline dye in a dark brown. Flood on, working from bottom up, and wipe up puddles. Then seal with dewaxed shellac, and apply a coat of gel stain. That should get you pretty close. (I'm assuming you don't have spray facilities so I didn't recommend a toner.)

Work out the finishing schedule on a good sized piece of scrap from dye to top coat before putting anything on your project.

Re: The LOML has comissioned

#4

Re: The LOML has comissioned

paul in AZ

"Almost ebonized" brings something like wenge to mind. It is a deep brownish-almost-black with figure a bit lighter and will turn close to ebony with a wipe of linseed. Expensive as sin, hard as concrete and it irritates my skin but not bad to work.

Mesquite can be spectacular if you can find good stuff locally. Not easy.

There must be inexpensive local wood that takes stain. I certainly wouldn't desecrate expensive lumber with stain or dye but that's just me.

How about taking her to a lumber yard to let her look at colors and pick something out? Gets you off the hook for a "bad" decision.

Re: The LOML has comissioned

#5

Re: The LOML has comissioned

Bruce, a MN Galoot

A few years ago, LOML wanted a bedside stand, mission style. I used ash (because that's what I had) and a Trans Tint dye. It turned out as dark as walnut, grain still visible but a nice uniform color and she loves it. What else is there?

Re: The LOML has comissioned

#6

Re: The LOML has comissioned

Ray Thompson - Middletown, IN

Go to Homesteadfinishing.com, JJ has come out with an espresso water based stain that has become one of my favorites. He has some pictures of the stain on different species and there is a wide variation in color. My favorite so far is maple followed by cherry.

Ray

Re: The LOML has comissioned

#7

Homestead *LINK*

mdclor

has changed to the below address.

HTH,

Merle


New Homestead address

Re: The LOML has comissioned

#8

Thanks for the correction

Ray Thompson - Middletown, IN

My mind reverted way back.

Ray