Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Finishing Bucote, suggestions?

Posts

Finishing Bucote, suggestions?

#1

Finishing Bucote, suggestions?

doug f, san clemente, ca

I just finished the construction of a ring box for my future daughter-in-law and am getting ready to finish it. My original thought was simply several sanded in coats of Waterlox (my favorite finish), but I thought I would call on the collected wisdom here to see if there were some other suggestions.

Any ideas, experiences or techniques that would help would be appreciated.

Thanks.

Doug

Re: Finishing Bucote, suggestions?

#2

Moses Yoder

Re: Finishing Bucote, suggestions?

Moses Yoder

If it's bocote (I think that is spelled right) and there is not some different type of wood called bucote I would not finish it. I would polish it to about 400 or 600 grit silicone carbide paper and leave it unfinished. The natural oils in the wood will protect it. The wood is so dense that finish does not really penetrate it so any finish you apply is like a film finish covering the outside of the wood.

Re: Finishing Bucote, suggestions?

#3

Re: Finishing Bucote, suggestions?

doug f, san clemente, ca

Thanks, Moses. If I leave it unfinished, just polished, would a coat of good wax have any benefit?

I've seen it spelled both ways; even two different ways in the same hardwood store,... Oh, well, in any case, it's the same wood.

Doug

Re: Finishing Bucote, suggestions?

#4

Re: Finishing Bucote, suggestions?

Thomas Skaggs, Foothills of Mount Level

Wax would be a good call. Should enhance the look too.

Re: Finishing Bucote, suggestions?

#5

Re: Finishing Bucote, suggestions?

Howard Acheson

Bucote is a tropical wood that contains a great amount of natural oil. Using any type of oil based finish will create a drying problem for the finish.

Your choices are to spray a coat of shellac first and then you can apply any finish. Even shellac would be an excellent finish all by itself. You can buy Zinsser Spray can shellac. One can should be enough. A lacquer finish would also work well on an oily wood.

Re: Finishing Bucote, suggestions?

#6

Re: Finishing Bucote, suggestions?

Paul Woolson

I treat it the same as I do various rosewoods. It needs to be sealed before you finish it. I really like the look of totally filled pores so I seal with epoxy (zpoxy is the finishing resin I like the best). Then you can finish with pretty much anything you like.

If you go with finish straight on the wood, I think you will have drying/adhesion problems between the finish and the resins in the wood.

Re: Finishing Bucote, suggestions?

#7

Re: Finishing Bucote, suggestions?

Dale Penkala

I tend to agree with the shellac for a finish. Grain filler is also a good suggestion. With exotic/tropical woods I've always liked shellac. As stated it would seal the wood but I would continue with building up the shellac base wet sand with 600 to 1000 grit sc paper recoat till your happy with the coat then rub it out. I myself like a high polished finish so I rub nearly all my finishs out. Zebra wood and rosewood rubbed out just have a lusture and depth that I love. Just my opinion though.

Dale

Mid Michigan

Re: Finishing Bucote, suggestions?

#8

Re: Finishing Bucote, update

doug f, san clemente, ca

I took Moses advice to heart and finished the ring box, or rather, DIDN"T finish the box. I sanded to 1000 grit then applied a coat of wax and buffed the flinders out of the wax.

The wood is "baby butt" smooth with an incredible feel that begs to be touched.

Many, many thanks for all the suggestions.

Doug