Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Hole filling

Posts

Hole filling

#1

Hole filling

Jon M

I have just built four 4' window boxes from recyled white pine. The wood has fastener holes from the previous use. Most of these holes I've hidden, but a few remain visible. The boxes are going to be primed & painted before going into use.

These are not high-art and I just want to fill the voids before painting.

What's a good exterior grade filler?

When they rot out in five years I'll anti-up and build them out of something more likely to hold up. In the mean-time I have more room in my lumber rack, the price is right, and most importantly my wife is pleased.

Re: Hole filling

#2

Re: Hole filling

Jesse Cloud

Get a dollar bag of wooden skewers at the grocery store. Put a little titebond 3 or other exterior glue in the void and on the end of the skewer, push it in as far as it will go. Break it off 1/8 proud. If the fastener void is not filled, repeat as necessary. Take a block or hammer and smash the 1/8 excess flat. Let dry and sand. Faster, cheaper, and more effective that wood paste.

Lots of other uses in the shop, too.

Re: Hole filling

#3

Clint Searl

Bondo

Clint Searl

Re: Hole filling

#4

Re: Hole filling

Mark Salomon

Exterior spackle works fine

Re: Hole filling

#5

Ditto

Mark Mandell - Gone Round In Jersey

Re: Hole filling

#6

We have a winner!

Jon M

Thank you. All great answers (exterior spackle?!!).

I had a can of Bondo in my hand this weekend, but passed on it when I opened the can in my basement workshop. I can take the smell, but my wife absolutely hates it. If it hadn't of been dark & rainy I would have moved outdoors and used it.

I'll move the 4 window boxes out to the tool shed & bondo them there on saw horses. Its supposed to be warmer this week in New Hampshire, so it will cure.