Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

New Tool

Posts

New Tool

#1

New Tool

Lester Gillett

I bought a new lock miter bit from Sommerfeld and i also got there easy set up jig. Will there are no

instruction with the set up jig. Has any one used this jig that can tell me what all the lines are for?

Also there are numbers on the top ring and a arrow across from the set star. Would like to use the

bit this week end but may have to weight till monday to call them.

Lester

Re: New Tool

#2

Have you asked Sommerfeld? *LINK*

Bill Houghton, Sebastopol, CA

Their online description sure doesn't provide much detail (linky below). Looks interesting, but I'm kind of reminded of a circular slide rule - easy when you know how, not so easy when you don't.


http://www.sommerfeldtools.com/Sommerfelds-Easy-Set-Up-Jig/productinfo/EZSET/

Re: New Tool

#3

Bart Goldberg

Lock Miter Bit Instructions

Bart Goldberg

This months issue of Fine Woodworking had a great article on how to set up these bits to get perfect results. I suggest you check it out.

Regards

Bart

Re: New Tool

#4

David Barnett

It actually works and it's easier than it looks *LINK*

David Barnett

Lester, it's as simple as described in this short review from American Woodworker online. Don't even bother with the usual manufacturer's instructions or magazine articles on setting up lock miter bits. This jig works way better than setting it with test cuts. Use a dial or digital caliper to measure thickness. I don't use lock miters but if I did, I'd use one of these. Call or email Sommerfeld for their instruction sheet for more information.


Simple, Accurate Bit-Height Gauge

Re: New Tool

#6

Re: New Tool

Lester Gillett

Thanks for all the help. The picture in American woodworker of the jig is not what i have. There is numbers

on the inner ring and across from the star is a pointer. Not sure what the pointer if for so on Monday I will

call them to see if they have a better instuction for it. You would think that some of these companys would

do a better job of making sure you can use there tools. A simple job of making instuction should not be that

hard.

Lester

Re: New Tool

#7

ebd

Re: New Tool

ebd

Go to this link and read the last paragraph under the description.

http://www.sommerfeldtools.com/ROUTER-SET-UP-JIG/productinfo/EZSET/

Re: New Tool

#8

Re: New Tool *LINK*

Bob Entwisle in NJ

Hi Lester,

Here is a link to Sommerfields instruction for the EZSet.

Bob in NJ


http://www.sommerfeldtools.com/sommerfelds/instructions_and_plans/ezset.pdf

Re: New Tool

#9

Sommerfeld has a 30-minute DVD

Henry Higginbotham

It's titled "Jointmaking with the Easy Set." I would have thought it came with the tool, but maybe not. You should be able to get one from them.

Re: New Tool

#10

Re: New Tool

Lester Gillett

Just called Sommerfelt about the Easy Set Jig. They have changed the jig to be used on the babby

lock miter bit and outher bits. to set the babby miter you use the inner ring number and the arrow

to the size of your wood. the inner numbers start at 15/32 and goes up when you turn the ring clock

wise. You use the outer number for all outher bits and each mark is 1/128". After you turn the ring

one full turn then you read the number on the left side of the long dark line. i sure hope they make

a new dvd and instuction for the new jig soon.

Lester