Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Useless sanding mat

Posts

Useless sanding mat

#1

Useless sanding mat

Terry in Edmonton

I bought a new waffle type sanding mat, brought it home and washed it well because they often have a thin film of mold release oil, left it to dry for a couple of days and then left a piece of walnut on it overnight by mistake. Last night I moved the wood and got ready to do some sanding and discovered a beautiful oily impression of the waffle pattern on it. Thankfully the piece was not for my present project but the oil soaked in deep enough that it does not readily sand out. I'm not sure I would even want to use this for a drawer liner.

The mat was bought from a woodworking store and marked as a router/sanding mat. Guess you can't trust anybody.

Re: Useless sanding mat

#2

Been There

Mark Mandell - Gone Round In Jersey

Got That

Did That [put in garbage - ruined a nice piece of cherry]

Since then I use a piece of foam carpet padding (the multi color stuff) that I stick to the bench with a couple of pieces of tape.

Re: Useless sanding mat

#3

Dale Lenz

Been using them for years...

Dale Lenz

never a problem. Maybe just lucky??

Re: Useless sanding mat

#4

a little sanding dust cures the problem

Bill Tindall

I have too used them for years. They are "oily" at the start but get not oily with use. Of course I never leave wood stored on them. They are also good for imobilizing sharpening stones/ plates and for preventing scuffs and dings when handling a project on the bench.

Re: Useless sanding mat

#5

Re: Useless sanding mat

Ken Oakley-Sunny St. Cloud, Fla

I use the rubber under mat for wall to wall carpeting. Works great and usually free from the Dumpster at a carpet business.

Re: Useless sanding mat

#6

Bob

1/4" thick neoprene from McMaster Carr

Bob

Been using neoprene sheet for a long time, holds well, cleans easy and isn't overly expensive. Mcmaster Carr sells many sizes and thicknesses. Don't clamp it hard though or it will leave a stain also.

Bob

Re: Useless sanding mat

#7

Re: Useless sanding mat

Scott W

Yes, I'll agree with you on that! I was at a plumbing supply last month and came across these small sqaures (2"x2"x1") of MDF with hard rubber on both sides. I asked the salesman what these are used for and he said they are put under furnaces, water heaters ect. Then asked how much... fifty cents each...! I bought 10 of them and use them for sanding, routing ect. Bench Cookies without the price!!! They work great with no problems of staining or moving!