Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Foam brushes and shellac-YES!

Posts

Foam brushes and shellac-YES!

#1

Foam brushes and shellac-YES!

Bill Tindall

Foam brushes do particularly well on flat surfaces when applying shellac. Unfortunately one has to work quick because the brushes with the wooden handles disintegrate after a few minutes exposure to ethanol. The white upholstery foam does not disintegrate and I use pieces of this white foam for applying shellac to things spinning (slowly!) on a lathe.

Today I was shellacing drawer insides and tried a foam brush I recently got as a pack of 50 from Woodworkers Supply. One buys plastic handles and the foam insert is replaceable. To my delight this foam is immune to ethanol.

BTW, I dilute Zinnser shellac 1:1 with ethanol, soak some up in the foam brush and with a light touch brush in one direction on the drawer sides and bottoms, applying a very wet coat. Sand with 400 grit and recoat. Dry and wax the outsides and the maple runners. Drawers glide like they are on ball bearings.

Re: Foam brushes and shellac-YES!

#2

JL

Thanks for sharing.

JL

I'm horrible with shellac - I can roll it on, but I don't do well with brushing it on.

Re: Foam brushes and shellac-YES!

#3

more on brushing shellac

Bill Tindall

I have seen two successful demonstrations for brushing shellac on any surface (the foam brush is best for flat acreage, like the drawer sides and bottoms(which are done before sliding into the drawers).

In both cases the experts used about 1.5 pound cut. In Case 1 a large, fine bristled brush was used and the user employed long, overlapping, quick strokes going only one direction.

In Case 2 the user employed a small 1" fine bristled brush (Takalon) and brushed furiously back and forth. Dip the brush, and with short strokes, furiously brush back and forth covering a small area with each brush full of shellac. In short order this expert covered a test panel and the result was a nice smooth build.

If there is a secret it would be to use dilute shellac and work quick.

Re: Foam brushes and shellac-YES!

#4

Re: Thanks for sharing.

Nick Tuzzolino

JL:

Re Bill Tindall's Method #2 below, with the Takalon brush, (art supply store, Michael's, etc) this is unbeliveably effective. It doesn't seem right, but the result is no brush marks, quick and efficient. Try it, you'll like it.

Re: Foam brushes and shellac-YES!

#5

David Barnett

Though I always have mopped with a squirrel,

David Barnett

I thought I'd give Taklon a whirl.

What was once slow massage,

Became frantic frottage,

Satisfying my client and my girl.

Thanks for the new trick, Bill! Works! Who knew?

Re: Foam brushes and shellac-YES!

#6

Ellis Walentine

Skunks and badgers

Ellis Walentine

About 20 years ago, Michael Dresdner introduced me to "fitch" brushes, made of skunk hair, for shellac. I never did get one, as we always used badger hair brushes for that purpose. I was wondering what the relative merits of these options might be v. the Taklon and squirrel hair brushes.

Ellis

Re: Foam brushes and shellac-YES!

#7

David Barnett

Sometimes a 'squirrel' mop isn't squirrel

David Barnett

I've got a lot of experience with badger hair, both for shaving and finishing, and although I preferred my old round squirrel-mop-in-a-jar, silvertip badger makes a very fine shellac mop, as well. Funny, all that badger hair and I've never stacked a knot for shellac. May never at this point, what with these draconian new Lacey regs coming in. Soon may have to use Taklon for everything.

Serendipity. As a favor to down-the-street 'new' grandparents (big event -- everything has to be 'just so'), I'd just started to brush some shellac on a suite of children's furniture as a quick 'safe' finish before their grandchild's first visit this Easter weekend, when I saw Bill's tip. Had to try to it. Loved it. That's a nice fast build without the drag and dust of padding or softer cure of a thickly brushed coat. Got it on there. Looks great. Two or three more build sessions and a 3M pad to even and satinize, and it'll be good to go.

Highly recommended. I don't learn a lot of new tricks. Pleasant surprise. Chalk up two for Bill T. -- the first was the big jump from 600 grit straight to 14,000 grit diamond -- no stops, no interim grits. I'd used diamond for some time, but I'd putzed in the midrange grit confusion before Bill said 'stop' -- 'jump'.

Re: Foam brushes and shellac-YES!

#8

Re: Foam brushes and shellac-YES!

Jesse Cloud

Thanks for sharing Bill. I've gotta try that!

At first I'll confess that I thought you had gone nuts - I've had the foam brushes disintegrate at the worst possible time. What a yucky mess. Great to know that not all foams do that. Also, sounds like a possible use for that bag of upholstery scraps in my shop! :D

Re: Foam brushes and shellac-YES!

#9

Providing proper credit for technique-Don Williams

Bill Tindall

The "Brush Like a Maniac" with Takalon was demonstrated by Don Williams, furniture conservator at the Smithsonian.

Funny story: Don an expert on all things shellac. He is giving this talk on shellac and he says to use a Takalon brush. And I interrupt and complain that I followed that advice and found that Takalon is all one doesn't want in a brush. It just doesn't hold enough stuff to make a full pass across anything long without reloading. And reloading makes overlap marks. I was duped! I just hate spending money for something that doesn't live up to claims and complaon at any opportunity.

So Don takes out this piddly little brush and selects a panel about 1.5 feet on a side and proceeds to brush like a mad man across it. Dipping in shellac, then furiously brushing in short back and forth strokes. Shellac is dripping from the brush onto the panel and he is paying it no mind at all, just dipping and brushing. In short order the panel had a nice build of shellac on it. Smiling he handed me the brush and said "now you try it" on another panel. Damned if it didn't work. The crow was a bit tough but I was obligated to eat it anyway.

Re: Foam brushes and shellac-YES!

#10

David Barnett

Thanks for pointing to the source

David Barnett

Well, I had heard about it -- the technique -- not the anecdote, but until I heard it from you, here, I was still from Missouri. I don't mind Taklon for some uses and have lots of Taklon artists brushes lying around, so I grabbed a few and said "this I gotta try."

Crow isn't all that bad once you get used to it. I had some only a couple weeks ago. Lots of good recipes. Foie gras isn't limited to ducks and geese, you know, and it sure beats the other p�t�.

Now if I just hadn't talked up what a green finish shellac is, I wouldn't have got roped into sloshing it all over kiddie furniture, heh.