Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

'Metric' adjustable wrench

Posts

'Metric' adjustable wrench

#1

'Metric' adjustable wrench

Tom Dunlap

I have a subscription to a daily tool sale website. Today started off with a laugh!

How can an open end adjustable [Think 'Crescent' ] wrench be 'metric'? :D Especially when it comes in a '12-inch' model?

What next...metric hammers? Will handsaws have to be metric rather than TPI? Does the cut come out smoother in metric?!

Here's the copy:

The Irwin 2078611 12-inch Metric Quick-Adjusting Wrench uses parallel jaws with smooth surfaces to help protect the surface being worked on. The Irwin 2078611 uses precise scale markings to get an idea of what size bolt you are on and the whole system runs on a grooved internal jaw and sliding lever. The Irwin 2078611 has the ProTouch grip to help provide the user with maximum comfort and reduced hand fatigue.

Re: 'Metric' adjustable wrench

#3

Jason Roehl in Lafayette, IN

Re: 'Metric' adjustable wrench

Jason Roehl in Lafayette, IN

Perhaps a more accurate description would be a "metric-marked adjustable wrench".

Somewhere, I have an adjustable wrench with markings on both sides--one metric scale, one English, with an indicator arrow on the movable portion of the jaw. So, after you've rounded off the hex bolt or nut, you'll know what size of socket or box-end wrench you should have used!

Jason

Re: 'Metric' adjustable wrench

#4

Jesper, Denmark

Re: 'Metric' adjustable wrench

Jesper, Denmark

So you can only undo the metric nuts and only tighten the inch ones? :D

Joking apart, the prime quality Bacho adjustable wrenches here in Europe generally do have jaw opening scales in mm. The action of the adjuster is also opposite to what you are used to in the USA. Both ways work OK, but if yopu have a mixed set, it gets frustrating.

Re: 'Metric' adjustable wrench

#5

Re: 'Metric' adjustable wrench

Gary Camp, Bend Oregon

The the size designation on the wrench was "No. 12 300mm" not 12 inch I always thought that made It a metric wrench ;-0

Re: 'Metric' adjustable wrench

#6

Re: 'Metric' adjustable wrench

Bill Turpin in WNC mountains

During the early 80's I worked for a refrigeration supply in Asheville, NC. The local vo-tech had a refrigeration course that required students to have a minimum set of hand tools to take the course. It was about $180. A kid came and got a quote on the 6"-8"-10"-12" crescent wrenches, etc. He asked for "crunchin" wrenches. Two weeks later, the PO came in from some govm't help agency for: "crunchin" wrenches. Not metric in those days! The minumum list insured that they could work a job if they finished the course. Say "crunchin" fast and a little hard, and you will hear how the mistake was made.

Re: 'Metric' adjustable wrench

#7

Jason Roehl in Lafayette, IN

No problem for me!

Jason Roehl in Lafayette, IN

I can never remember which way the screw works on an adjustable wrench anyway, but part of that is due to infrequent use--I generally try to find the appropriate size of socket or wrench first before I resort to an adjustable.

Jason

Re: 'Metric' adjustable wrench

#8

Re: 'Metric' adjustable wrench

Jesse Cloud

When I can't find a metric conversion table and I'm too lazy to do the math, I reach for my LV dual scale wrench, set it to say 5/8 inch and look at the metric side for the conversion. Handy little gadget. ;)

Re: 'Metric' adjustable wrench

#9

Easy turn it tell it fit's 

del schisler

Re: 'Metric' adjustable wrench

#10

Right up there with my left handed screwdriver.

Don Orr

Re: 'Metric' adjustable wrench

#11

Metric vise grips, of course

Bill Houghton, Sebastopol, CA

After you've rounded off the corners with the metric adjustable wrench, you use the metric vise grips for (on good days) removing or (on bad days) further rounding the nut/bolt.

I like, "The Irwin 2078611 uses precise scale markings to get an idea of what size bolt you are on..." OK, the scale markings are precise, and you'll have an idea - as opposed to knowing - what size the nut/bolt head is (though, to be precise, as it were, I should point out that bolt sizes are generally designated by the diameter of the shank, not the head, which may vary - German, or at least old VW, practice uses 13mm heads where other countries use 12mm heads for the same shank size).