Door finishing job. *LINK*
JL
I've been asked to put a finish on the doors going in the "Dogwood" or choir vesting room. This is the sweat equity part of our reconstruction project.
The protocol that I've been asked to follow is:
1) light single coat of acrylic polyurethane
2) stain and wipe
3) multiple coats of acrylic polyurethane
The contractor has been using Rich Wood from Richards Paint (see url). They've been using #73 Rich Wood Acrylic Urethane Varnish Semi-Gloss. I don't have any issue with the protocol. I haven't heard of Richards Paint Company though.
I figured on using Minwax Polycrylic if I run out of the Rich Wood. Thoughts?



